Brief introduction: BM2010A is a quantitative analytical instrument developed according to the requirements of cement enterprises.It is mainly used to test the content of CaO%, fe2o3%, SiO2%, al2o3% and so3% in raw materials and clinker materials or cement, and provide fast analysis data for raw material rate value, clinker rate value and cement ingredients.The contents of CaO%, Fe2O3%, SiO2%, Al2O3% and SO3% in limestone, clay, gypsum and other materials are analyzed to provide quality data for raw materials in the factory. The content of CaO% and SO3% in cement can provide analysis data for the incorporation of cement mixture.Therefore, the improvement of production from component control to rate control is helpful to the management of ex-factory cement. BM2010A can also be used in other applications where CaO%, fe2o3%, SiO2%, al2o3% and SO3% need to be analyzed, such as kaolin, refractory, etc. Advantages: (1) no radioactive source, which belongs to the exemption management scope of the environmental protection department. (2) large LCD display, Chinese menu, easy to operate. Fast preheating speed, short start-up time. (our products only take 30 minutes from starting up to testing, while similar products in the market take 2 hours). (3) sound and light automatic alarm, keyboard and printer on the panel, man-machine dialogue operation. (4) physical analysis method is adopted to avoid contacting and damaging samples in the analysis without the need of chemical reagents. (5) highly integrated instruments with strong environmental adaptability and anti-interference ability. (6) the instrument analysis system, which can be used independently, can also be used online with the microcomputer batching system through the RS232 or RS485 standard serial port of the instrument. (7) the five ingredients were analyzed simultaneously and quickly, and the "continuous measurement standard sample method" was adopted. The results could be obtained within 30 seconds at the soonest with high accuracy.Our company recommends 3 minutes results, 2 minutes faster than similar products on the market. (other manufacturers are 5 minutes). (8) the software has strong functions and large data storage capacity, and can add software functions at will according to user requirements, with high cost performance. The products of our company can be used to measure the incorporation amount of cement mixed materials, and to test the uniformity of cement. Technical indicators: 1. Analysis scope :CaO, Fe2O3, SiO2, Al2O3, SO3:0.01%~100%; 2. Analysis width :CaO is less than 7%, Fe2O3 is less than 5%, SiO2 is less than 5%, Al2O3 is less than 7%, and SO3 is less than 5%. 3. Analysis accuracy: standard deviation SCaO is less than or equal to 0.10%;SFe2O3 0.05% or less.SSiO2 0.07% or less.SAl2O3 0.05% or less.SSO3 0.05% or less. 4. The permissible error: Δ CaO % 0.30% or less;Δ Fe2O3%0.10% or less;Δ SiO2%0.20% or less;Δ Al2O3%0.10% or less;Δ SO3%0.10% or less; 5. Analysis time :n*180 seconds (n is 1 ~ 3 natural Numbers, usually 1); 6. Stability: absolute drift Δ CaO % 0.15% or less;Δ Fe2O3%0.10% or less;Δ SiO2%0.10% or less;Δ Al2O3%0.10% or less;Δ SO3%0.10% or less; 7. Use conditions: temperature: 5 ~ + 40 ℃, relative humidity: 85% or less (30 ℃), power supply: 220 v + 20 v, 50 hz. 8.Power consumption: less than or equal to 50W; 9. Size and weight :485mm * 385mm * 145mm, 18kg.
