BF-03A kinematic viscosity tester Introduction: The BF-03A kinematic viscosity tester, designed and manufactured in accordance with the GB/T 265 standard, is capable of accurately measuring the kinematic viscosity of petroleum products as described in the standard. It is suitable for measuring the kinematic viscosity of liquid petroleum products (Newtonian liquids), with the unit being mm²/s. The BF-03A kinematic viscosity tester boasts an aesthetically pleasing and elegant design, a reasonable structural design, easy operation, and accurate result determination. Features: The electrical control system of this instrument utilizes a digital temperature controller for controlling the temperature of the constant temperature bath. The use of a digital temperature controller allows for intuitive display of both the set temperature and the actual temperature, making it easy to set the temperature and correct for temperature differences. 2. The constant temperature bath of this instrument is a fully transparent glass tank, which facilitates the operator to observe the flow of the sample from various angles, fully complies with the standard description, and improves the accuracy of the measurement results. 3. The BF-03A kinematic viscosity tester is equipped with four viscometer clamps, which can maintain a constant temperature for other samples to be tested while conducting sample measurements, Improve work efficiency. The viscometer clamp is ingeniously designed. Simply insert the capillary viscometer into the viscometer clamp, and adjust the three positioning screws on the viscometer clamp to easily adjust the capillary viscometer to a vertical position, thereby enhancing the accuracy of measurement results. Technical Specifications: Working power supply: AC 220V±10% 50HZ Input power: <1850W Main heating power: 1000W Auxiliary heating power: 800W Temperature control range: 40~100℃ Temperature control accuracy: ±0.1℃ Capillary type: Pinfish capillary viscometer Number of test holes: 4 holes
BF-03A kinematic viscosity tester Introduction: The BF-03A kinematic viscosity tester, designed and manufactured in accordance with the GB/T 265 standard, is capable of accurately measuring the kinematic viscosity of petroleum products as described in the standard. It is suitable for measuring the kinematic viscosity of liquid petroleum products (Newtonian liquids), with the unit being mm²/s. The BF-03A kinematic viscosity tester boasts an aesthetically pleasing and elegant design, a reasonable structural design, easy operation, and accurate result determination.
