ATR7000 series online Raman analysis system Introduction: The ATR7000 series online Raman system is an online analysis system for mixture component content, independently developed by our company based on nearly a decade of research accumulation. The ATR7000 series online Raman system provides a rapid, accurate, and stable detection method for the composition and properties of various homogeneous liquid mixtures. By establishing corresponding quantitative analysis models, this system can be widely applied to various continuous or batch production processes, enabling online real-time detection of product composition and content, and providing key measurement information for advanced control and real-time optimization. Considering the characteristics of process applications, the ATR7000 series analysis system can be used in a positive pressure explosion-proof form, directly placed outdoors in hazardous areas or within an analysis cabin. When the process sampling point is close to the control room or operation room (distance ≤ 200m), the main cabinet of the analysis system can also be installed in a non-explosion-proof form within the control room or operation room, and connected to the on-site Raman probe located in the hazardous area via optical fiber for remote analysis and measurement. Technical characteristics: 1. Real-time online monitoring; 2. Non-contact, non-destructive, and rapid detection, without interference from water; 3. A single instrument can monitor 4 channels simultaneously; 4. 18cm long rod probe, with high temperature and corrosion resistant versions available; 5. Threaded interface of Pg13.5; 6. 12mm OD； 7. Capable of withstanding a maximum temperature of 300℃ in a high-temperature environment; 8. Physical button and touch screen control; 9. The probe can reach a maximum distance of 500 meters; 10. Multiple remote communication methods such as RS485, CAN, and LAN; 11. 12V DC power supply; 12. The explosion-proof grade shall not be lower than Ex ic nc IIC T4 Gc 13. Threshold alarm and audible and visual alarm can be set;
ATR7000 series online Raman analysis system Introduction: The ATR7000 series online Raman system is an online analysis system for mixture component content, independently developed by our company based on nearly a decade of research accumulation. The ATR7000 series online Raman system provides a rapid, accurate, and stable detection method for the composition and properties of various homogeneous liquid mixtures. By establishing corresponding quantitative analysis models, this system can be widely applied to various continuous or batch production processes, enabling online real-time detection of product composition and content, and providing key measurement information for advanced control and real-time optimization. Considering the characteristics of process applications, the ATR7000 series analysis system can be used in a positive pressure explosion-proof form, directly placed outdoors in hazardous areas or within an analysis cabin. When the process sampling point is close to the control room or operation room (distance ≤ 200m), the main cabinet of the analysis system can also be installed in a non-explosion-proof form within the control room or operation room, and connected to the on-site Raman probe located in the hazardous area via optical fiber for remote analysis and measurement.
