| Parameter | A1050 | A1020 |
| Product Type | Medium-frequency high-voltage plasma cleaning power supply | Medium-frequency high-voltage plasma cleaning power supply |
| Output Power | 100–5,000 W | 100–2,000 W |
| Input Voltage | AC 380 V (-15% to +25%) | AC 220 V (-15% to +25%) |
| Maximum Output Peak Voltage | 20 kV | 20 kV |
| Output RMS Voltage | 6.8 kV | 6.8 kV |
| Maximum Output Current | 5 A | 2.5 A |
| Output Frequency | 20–80 kHz, adjustable | 20–80 kHz, adjustable |
| Controller | ARM + FPGA | ARM + FPGA |
| Output Interruption Detection | Supported | Supported |
| Output Overvoltage Protection | Supported | Supported |
| Output Overcurrent Protection | Supported | Supported |
| High-Speed ADC Sampling | Supported | Supported |
| Fault Recording | Supported | Supported |
| Dimensions (W × H × D) | 496 × 177 × 645 mm | 276 × 177 × 590 mm |
| Weight | 30 kg | 10 kg |
| Feature | A1050 | A1020 |
| Maximum Output Power | 5,000 W | 2,000 W |
| Input Voltage | AC 380 V | AC 220 V |
| Maximum Output Current | 5 A | 2.5 A |
| Maximum Output Peak Voltage | 20 kV | 20 kV |
| Output RMS Voltage | 6.8 kV | 6.8 kV |
| Frequency Range | 20–80 kHz | 20–80 kHz |
| Control System | ARM + FPGA | ARM + FPGA |
| Protection Functions | Overvoltage, overcurrent, interruption detection | Overvoltage, overcurrent, interruption detection |
| Fault Recording | Supported | Supported |
| Dimensions | 496 × 177 × 645 mm | 276 × 177 × 590 mm |
| Weight | 30 kg | 10 kg |
| Typical Configuration | Higher-power wide-width DBD plasma systems | Lower-power compatible plasma systems |