3030B type exhaust gas dioxin tester Introduction: This instrument is used in conjunction with the Laoying exhaust gas dioxin/heavy metal/organic matter multifunctional sampling tube for the collection of pollutant samples such as dioxin, heavy metals, and organic matter in exhaust gas pollution sources. Dioxin collection can be applied to hazardous waste incineration disposal facilities, medical waste incineration treatment facilities, cement kiln incineration treatment of hazardous waste facilities, environmental protection acceptance inspection of construction projects upon completion, dioxin monitoring during supervisory testing, dioxin emission detection in domestic waste incineration facilities, and other applicable occasions. Heavy metal collection can be applied to exhaust gas detection in heavy non-ferrous metal smelting industry, lead-acid battery industry, leather and its products industry, chemical raw materials and chemical products manufacturing industry, and other industries with heavy metal emissions from stationary pollution sources. The products are widely used in various fields such as environmental protection, testing companies, industrial and mining enterprises (power plants, steel plants, cement plants, sugar refineries, paper mills, smelting plants, ceramic factories, boiler kilns, as well as aluminum, magnesium, zinc, titanium, silicon, and pharmaceutical industries, including fertilizer, chemical, rubber, and material factories), healthcare, labor, safety supervision, military, scientific research, education, and more. Implementation standard GB/T 16157-1996 Sampling Method for Particulate Matter and Gaseous Pollutants in Exhaust Gas from Stationary Sources GB 18485-2014 Standard for Pollution Control on the Municipal Solid Waste Incineration HJ/T 48-1999 Technical Conditions for Smoke Sampler HJ/T 365-2007 Technical Specifications for Dioxin Emission Testing of Hazardous Waste Incineration and Disposal Facilities Including Medical Waste HJ/T 397-2007 Technical Specifications for Monitoring of Stationary Source Exhaust Gas HJ 77.2-2008 Determination of Dioxins in Ambient Air and Exhaust Gas - Isotope Dilution High-Resolution Gas Chromatography-High-Resolution Mass Spectrometry Method HJ 646-2013 Determination of Polycyclic Aromatic Hydrocarbons in Ambient Air and Exhaust Gas in Gas Phase and Particulate Matter - Gas Chromatography-Mass Spectrometry Method HJ 647-2013 Determination of Polycyclic Aromatic Hydrocarbons in Ambient Air and Exhaust Gas - Gas Phase and Particulate Matter - High-Performance Liquid Chromatography Method HJ 916-2017 Technical Specifications for Environmental Dioxin-like Compounds Monitoring JJG 680-2021 Smoke and Dust Sampler Features: 1. Equipped with a sampling tube, it can complete the collection of dioxins, heavy metals, and organic compounds from stationary pollution sources 2. Isokinetic tracking sampling, real-time temperature and pressure monitoring, automatic flow adjustment, stable flow, and fast response time 3. Real-time monitoring of operating conditions, including dynamic pressure, static pressure, flue gas temperature, flow rate, and other parameters; 4. Equipped with a fixed potential electrolysis flue gas sensor, it allows for the independent selection of sensors according to needs, enabling simultaneous measurement of multiple gases; 5. Highlighted, it has strong environmental adaptability; the operation interface is simple and friendly, and the data presentation is intuitive. 6. Equipped with a fault self-checking function, it can detect the functions of the instrument and indicate faults, facilitating user maintenance and use; 7. An optional built-in lithium battery pack can be equipped, or an AC power adapter can be used for power supply 8. High-efficiency sampling pump, corrosion-resistant, maintenance-free for continuous operation, adaptable to various working conditions; 9. It can be equipped with various sampling tubes as needed to achieve functions such as flue gas analysis and flue gas sampling Technical parameters: Sampling flow rate: (0~120) L/min Flue gas dynamic pressure: (0~2000) Pa Static pressure of flue gas: (-30~+30) kPa Pressure before flowmeter: (-60~0) kPa Temperature before flowmeter: (-55~125)°C Atmospheric pressure: (50~130) kPa Flue gas temperature: (0~500)℃, scalable Dry and wet bulb temperature: (optional) (0~100)℃ Maximum sampling volume: 99999.9L Isokinetic sampling flow rate: (1~45) m/s Sampling pump load capacity: ≥60 L/min (at a resistance of 20 kPa)
Introduction: This instrument is used in conjunction with the Laoying exhaust gas dioxin/heavy metal/organic matter multifunctional sampling tube for the collection of pollutant samples such as dioxin, heavy metals, and organic matter in exhaust gas pollution sources. Dioxin collection can be applied to hazardous waste incineration disposal facilities, medical waste incineration treatment facilities, cement kiln incineration treatment of hazardous waste facilities, environmental protection acceptance inspection of construction projects upon completion, dioxin monitoring during supervisory testing, dioxin emission detection in domestic waste incineration facilities, and other applicable occasions. Heavy metal collection can be applied to exhaust gas detection in heavy non-ferrous metal smelting industry, lead-acid battery industry, leather and its products industry, chemical raw materials and chemical products manufacturing industry, and other industries with heavy metal emissions from stationary pollution sources. The products are widely used in various fields such as environmental protection, testing companies, industrial and mining enterprises (power plants, steel plants, cement plants, sugar refineries, paper mills, smelting plants, ceramic factories, boiler kilns, as well as aluminum, magnesium, zinc, titanium, silicon, and pharmaceutical industries, including fertilizer, chemical, rubber, and material factories), healthcare, labor, safety supervision, military, scientific research, education, and more.
