ZHY-Q5 Crane Speed and Displacement Detector Introduction: This instrument is designed and developed based on the requirements for the braking sliding distance of lifting mechanisms in the specifications of "General Bridge Cranes (GB-T 14405-2011)" and "General Portal Cranes (GB-T 14406-2011)", and is suitable for special inspection units to measure the braking sliding distance of lifting mechanisms. The software interface design of this instrument is friendly, simple and easy to use, with high measurement accuracy and convenient and safe operation; There is no need to connect switches (commands) in series in the control circuits of cranes and various equipment, and operators do not need to master professional measurement knowledge to use them. The integrated toolbox design adopts a high-strength outer box, which is easy to carry and use on site, and is a conventional testing instrument for crane safety inspection. Product testing basis: According to the requirements for the braking sliding distance of the lifting mechanism in GB-T 14405-2011 General Bridge Cranes: 5.3.3 For hook cranes, the braking distance of the lifted object during descent braking (the sliding distance from the moment the mechanism controller runs stably at the lowest speed of descent, pulls back to zero, and loses power from the brake to the moment the heavy object stops) should not exceed 1/65 of the stable lifting distance within 1 minute. According to the requirements for the braking sliding distance of the lifting mechanism in GB-T 14406-2011 General Purpose Portal Cranes: 5.3.3 For hook cranes, the braking distance of the lifted object during descent braking (the sliding distance from the moment the mechanism controller runs stably at the lowest speed of descent, pulls back to zero, and loses power from the brake to the moment the heavy object stops) should not exceed 1/65 of the stable lifting distance within 1 minute. Technical parameters: Displacement measurement range: ≤ 5m Displacement measurement accuracy: ≤ 0.5mm Speed measurement range: ≤ 1m/s Speed measurement accuracy: ≤ 0.01m/s Measurement accuracy of braking sliding distance of lifting mechanism: ≤ 0.5mm Working environment humidity: ≤ 90% RH Working environment temperature: -10~50 ℃
Introduction: This instrument is designed and developed based on the requirements for the braking sliding distance of lifting mechanisms in the specifications of "General Bridge Cranes (GB-T 14405-2011)" and "General Portal Cranes (GB-T 14406-2011)", and is suitable for special inspection units to measure the braking sliding distance of lifting mechanisms. The software interface design of this instrument is friendly, simple and easy to use, with high measurement accuracy and convenient and safe operation; There is no need to connect switches (commands) in series in the control circuits of cranes and various equipment, and operators do not need to master professional measurement knowledge to use them. The integrated toolbox design adopts a high-strength outer box, which is easy to carry and use on site, and is a conventional testing instrument for crane safety inspection.