Position: Home > > Physical property test > Thermal analysis instrument > Differential scanning calorimeter > ZCT-B Comprehensive Thermal Analyzer for Materials Analysis

ZCT-B Comprehensive Thermal Analyzer for Materials Analysis

Product ID:WLcs029

US$0.00 ~ US$1.00 PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberZCT-B
    Brand NameJINGYIGAOKE
    Payment TermsTT,PAYPAL
    ZCT-B Comprehensive Thermal Analyzer
     
    Introduction:
           Comprehensive thermal analysis combines the thermogravimetric analysis TG with the differential thermal analysis DTA or differential scanning calorimetry DSC, and the thermogravimetric and differential thermal information can be obtained simultaneously using the same sample in the same measurement. The following properties of materials are studied: melting, crystallization, phase transition, reaction temperature and heat of reaction, heat of combustion, specific heat, thermal stability, decomposition, redox, adsorption and desorption, free water and crystal water content, composition ratio calculation, etc. Product application: The comprehensive thermal analyzer is used in most material fields, including plastics, rubber, synthetic resins, fibers, coatings, grease ceramics, cement, glass, refractory materials, fuels, medicine, food, refractory materials, etc.
    Features:
    1. The whole machine is integrated, the structure is reasonable, and the mechanical performance is stable
    2. The furnace body is automatically raised and lowered to simplify the operation
    3. Adopt a highly integrated acquisition and control system, with a high degree of automation
    4. Vertical structure, top loading, easy to operate, not easy to damage, prevent sample furnace body.
    5. A variety of heating furnaces, suitable for more fields, users can replace by themselves, simple and convenient
    6. The computer collects signals, the software interface is friendly, and it is suitable for win7, win8, win10 systems
    7. Excellent scalability, can be combined with infrared analyzer (FTIR), mass spectrometer (MS), gas chromatograph (GC)
    Technical parameter:
    Product model: ZCT-B type
    Temperature range: room temperature -1450 degrees
    Heating rate: 0.1~100/min
    Cooling rate: 0.1~40/min
    Temperature Sensitivity: 0.1
    Differential thermal range ±10±1000uV
    Differential thermal sensitivity: 0.01μV
    Differential Thermal Accuracy: 0.1μV
    Software simulation DSC: ±1±100mW
    DSC sensitivity: 0.1uW
    Thermogravimetric range: 1-200mg, replace the support rod up to 5g
    Thermogravimetric sensitivity: 0.1ug
    Thermogravimetric accuracy: 1ug
    Thermal Gravity Noise: <1ug
    Thermogravimetric differential range: 1-100mg/min
    Auto-zero range: 0999mg
    Vacuum degree: 2.66X10-2Pa
    Atmosphere control: dual-channel voltage stabilization and steady flow control, (various corrosion-resistant atmosphere control systems can be customized)
    Crucible: Standard alumina 0.06ml or 0.12ml, optional aluminum crucible, copper crucible, platinum crucible, quartz crucible, graphite crucible
    Constant temperature water bath (optional): temperature accuracy ±0.1
    Thermostat controller (optional): mass spectrometer connector, controller temperature range 0~400
    Output method: brand computer, laser printer
     
  • Introduction:
           Comprehensive thermal analysis combines the thermogravimetric analysis TG with the differential thermal analysis DTA or differential scanning calorimetry DSC, and the thermogravimetric and differential thermal information can be obtained simultaneously using the same sample in the same measurement. The following properties of materials are studied: melting, crystallization, phase transition, reaction temperature and heat of reaction, heat of combustion, specific heat, thermal stability, decomposition, redox, adsorption and desorption, free water and crystal water content, composition ratio calculation, etc. Product application: The comprehensive thermal analyzer is used in most material fields, including plastics, rubber, synthetic resins, fibers, coatings, grease ceramics, cement, glass, refractory materials, fuels, medicine, food, refractory materials, etc.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com