XWJ-500B Thermal Analyzer Introduction: The XWJ-500B thermomechanical analyzer has a wide measurement range, diverse measurement methods, powerful analysis functions, and accurate and reliable data, making it an ideal analytical instrument for product development. Suitable for plastic production enterprises to conduct product quality analysis, adjust product formulas, and other applications. It can also be used by plastic formula research and development institutions to adjust formula analysis. This instrument is an analytical tool used to determine the glass transition temperature (Tg) and flow temperature (Tf) of polymers. This product heats the sample at a certain heating rate, causing it to deform with increasing temperature under a constant and small load. The temperature deformation curve of the sample is measured, and the glass transition temperature (Tg) and flow temperature (Tf) of the sample are determined by analyzing the temperature deformation curve of the sample. It has the advantages of high technical content, strong software functions, wide measurement range, accurate measurement, stable performance, and easy operation. Technical parameters: Measurement forms: compression, bending, stretching, penetration, expansion deformation Temperature range: High temperature: Room temperature~+500 ℃, Low temperature: -60 ℃~Room temperature (optional) Deformation measurement range: 5mm Deformation measurement resolution: 0.001mm (displacement sensor) Heating rate: 0.5 ℃/min, 1.2 ℃/min, 2 ℃/min, 5.0 ℃/min (can be set arbitrarily between 0.5-5 ℃/min) Cooling rate: -0.5 ℃/min to -2 ℃/min. (with refrigeration) Heating rate error: ≤ 0.5 ℃/min Temperature measurement accuracy: ± 0.5 ℃ Temperature control accuracy: ± 1 ℃ Load range: 50g-3000g Required space: 0.5m in front and back, 1.0m on both sides Real time display: temperature deformation and temperature time curve Automatic calculation: Tg, Tf, and coefficient of expansion 3.13 Print test curves and reports Instrument size: 438mm × 438mm × 680mm Power supply: 220V ± 10%, 50HZ, 800W Refrigerant: Liquid nitrogen Refrigerant bottle capacity: 30L Air pump flow rate: 37L/min Tank pressure: 0.16Mpa Work pressure: 0.03~0.08Mpa Control switch: Low temperature solenoid valve
Introduction: The XWJ-500B thermomechanical analyzer has a wide measurement range, diverse measurement methods, powerful analysis functions, and accurate and reliable data, making it an ideal analytical instrument for product development. Suitable for plastic production enterprises to conduct product quality analysis, adjust product formulas, and other applications. It can also be used by plastic formula research and development institutions to adjust formula analysis. This instrument is an analytical tool used to determine the glass transition temperature (Tg) and flow temperature (Tf) of polymers. This product heats the sample at a certain heating rate, causing it to deform with increasing temperature under a constant and small load. The temperature deformation curve of the sample is measured, and the glass transition temperature (Tg) and flow temperature (Tf) of the sample are determined by analyzing the temperature deformation curve of the sample. It has the advantages of high technical content, strong software functions, wide measurement range, accurate measurement, stable performance, and easy operation.
