XRW-300E Thermal Deformation Vicat Softening Point Temperature Tester Introduction: The XRW-300E type thermal deformation and Vicat softening point temperature tester is designed in accordance with international and national standards, and is used to measure the heat softening properties of plastic raw materials or finished products. Features: 1. Support thermal deformation testing for various samples specified by standards. 2. Support various Vicat softening point tests specified by standards. 3. The optimized isothermal heating algorithm ensures a stable and accurate heating process. 4. The software corrects displacement errors and temperature errors. 5. Hardware adjustment temperature error. 6. Set the upper limit temperature, deformation amount, and Vicat penetration depth freely. 7. Freely set the heating rate. 8. The test will automatically stop when the upper limit temperature or deformation amount is reached. Technical Specifications: Temperature control range: room temperature to 300℃. Heating rate: arbitrarily set. Temperature measurement method: PT100 sensor, single-point measurement Temperature resolution: 0.1℃ Temperature error: ±0.5℃ Deformation measurement method: LVDT sensor Deformation measurement range: 0-2mm Deformation measurement error: 0.01mm Deformation measurement resolution: 0.005mm Three sets of weights, each set consisting of 2000g, 1000g, 500g, 200g, 100g, and 50g Structural form: Desktop Number of sample racks: 3 as standard, multiple sample racks can be customized Adjustment range of span for thermal deformation test: 60mm - 180mm Heating medium: methyl silicone oil (applicable to room temperature to 300℃, with viscosity requirement below 100CS) or transformer oil (for use up to 200℃) Fuel tank capacity: approximately 30 liters Heating power: 4KW Power supply: 220V±10% 25A 50Hz Cooling method: natural cooling or circulating water cooling Host dimensions: 580×550×310mm
XRW-300E Thermal Deformation Vicat Softening Point Temperature Tester Introduction: The XRW-300E type thermal deformation and Vicat softening point temperature tester is designed in accordance with international and national standards, and is used to measure the heat softening properties of plastic raw materials or finished products.
