XRW-300B Thermal Deformation Vicat Softening Point Temperature Tester Introduction: The XRW-300B Vicat Softening Point Temperature Tester is designed in accordance with international and national standards, specifically for determining the heat softening properties of plastic raw materials or finished products. By replacing the indenter, this tester can measure both the heat distortion temperature and Vicat temperature. It utilizes transformer oil (up to 200°C) or methyl silicone oil (up to 300°C) as the heat transfer medium. A mechanical dual stirrer facilitates oil circulation within the chamber, and the large-capacity oil tank ensures stable temperature control and uniform temperature distribution. Features: 1. Support thermal deformation testing for various samples specified by standards. 2. Supports various Vicat softening point tests specified by standards. The optimized isothermal heating algorithm ensures a stable and accurate heating process. The software corrects displacement and temperature errors. 5. Hardware adjustment temperature error. 6. Freely set the upper limit temperature, deformation amount, and Vicat penetration depth. 7. Freely set the heating rate. The test will automatically stop when the upper limit temperature or deformation amount is reached. 9-inch LCD display, menu operation, simple and intuitive, easy to learn and use. 10. Automatically record and display test results. 11. Equipped with a standard micro printer, test results can be printed with one click. The 12-electric lifting sample rack can be lifted as a whole when installing samples and can be lowered as a whole after installation, making it very convenient to use. Technical Specifications: Temperature control range: room temperature to 300℃. Heating rate: set arbitrarily. Temperature measurement method: PT100 sensor, single-point measurement Temperature resolution: 0.1℃ Temperature error: ±0.5℃ Deformation measurement method: LVDT sensor Deformation measurement range: 0-2mm Deformation measurement error: 0.01mm Deformation measurement resolution: 0.005mm Weight configuration: 2000g, 1000g, 500g, 200g, 100g, 50g Structural form: Desktop Number of sample racks: 3 as standard, multiple sample racks can be customized Adjustable range of span for thermal deformation test: 60mm - 180mm Heating medium: Methyl silicone oil (applicable to room temperature to 300℃, with viscosity requirement below 100CS) or transformer oil (for use up to 200℃) Fuel tank capacity: around 30 liters Heating power: 4KW Power supply: 220V±10% 25A 50Hz Cooling method: natural cooling or circulating water cooling Host dimensions: 580×550×1010mm
XRW-300B Thermal Deformation Vicat Softening Point Temperature Tester Introduction: The XRW-300B Vicat Softening Point Temperature Tester is designed in accordance with international and national standards, specifically for determining the heat softening properties of plastic raw materials or finished products. By replacing the indenter, this tester can measure both the heat distortion temperature and Vicat temperature. It utilizes transformer oil (up to 200°C) or methyl silicone oil (up to 300°C) as the heat transfer medium. A mechanical dual stirrer facilitates oil circulation within the chamber, and the large-capacity oil tank ensures stable temperature control and uniform temperature distribution.
