Brief introduction XDL-80 belongs to the infrared gas analyzer which is not divided into light type, and adopts the latest infrared detection technology. The working principle is based on the absorption ability of some gases to the infrared radiation of a specific wavelength of infrared band. The absorption degree depends on the concentration of the measured gas. The products are widely used in environmental monitoring, gas analysis, petrochemical, metallurgical process components analysis, industrial furnace gas analysis, thermal efficiency testing and other fields. Features 1. The continuous measurement of SO2, NO, CO, CO2, CH4, O2, C2H4, C3H8, THC, such as R22 gas 2. At the same time analysis of one to five components 3. Multiple 4-20 ma analog output, R232 signal output 4. Intelligent instrument, automatic calibration, fault self-diagnosis 5. High precision and good stability 6. The menu operation, all Chinese LCD display, easy to operate 7. The PPM and mg/m3 is optional 8. A very short preheating time, five minutes 9. Not afraid of vibration, can be used car Measurement range SO2:0 ~ 500mg/m3 to 20% ~ 0 (IR) NO: 0 ~ 500mg/m3 to 0 ~ 5000ppm (infrared) CO:0 ~ 500mg/m3 to 100% ~ 0 (IR) CO2: 0 ~ 500mg/m3 to 100% ~ 0 (IR) CH4: 0 ~ 500mg/m3 to 20% ~ 0 (IR) SF6: 0 ~ 500mg/m3 to 0 ~ m3 5000mg/ (infrared) N2O:0 ~ 500mg/m3 to 0 ~ m3 5000mg/ (IR) O2: 5% ~ 0 to 25% ~ 0 (Electrochemistry)
Brief introduction XDL-80 belongs to the infrared gas analyzer which is not divided into light type, and adopts the latest infrared detection technology. The working principle is based on the absorption ability of some gases to the infrared radiation of a specific wavelength of infrared band. The absorption degree depends on the concentration of the measured gas. The products are widely used in environmental monitoring, gas analysis, petrochemical, metallurgical process components analysis, industrial furnace gas analysis, thermal efficiency testing and other fields.
