WZR cone penetration meter

Product ID:HZSYzrd012

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberWZR
    Brand NameSHANGHAIYIDIAN
    Payment TermsT/T, paypal
    Introduction:
    It is widely used to measure the hardness of grease, petroleum jelly and pharmaceutical ointment products or other semi-solid materials. It plays an important role in the design, quality control and identification of product characteristics. Within 5 seconds of the test cone being released (or a custom time interval), the coning depth into the object being measured. Its unit is 0.lmm as a cone penetration. The greater the degree of penetration, the softer the sample, and the harder it is.
    The measurement method conforms to the national standard GB/T 269-1991, and has a compact structure design, liquid crystal display, automatic data acquisition and corresponding statistical calculation, and printout measurement report. Can output data to PC. The entire testing process is very simple and fully compliant with the National Pharmacopoeia. The measurement results are accurate, and it has good repeatability and system stability.
    Technical Parameters:
    Instrument model: WZR
    Measuring range: 0mm ~ 50mm (cone penetration unit 0-500)
    Minimum reading: 0.01mm (cone input unit is 0.1)
    Displacement sensor resolution: 0.01mm.
    Measuring cone total weight: total weight 150 g ± 0.1 g
    The cone mass is 114.44g±0.07g
    Timing range: 1s~9.9s
    Communication interface: RS232
    Printer model: Standard micro printer (RMDIII 32PHR-410)
    Display mode: LCD screen display
    Power supply: 220V±22V, 50Hz±1Hz
    Instrument size: 340mm × 280mm × 600mm
    Instrument net weight: 16 kg
     
     
  • Introduction:
    It is widely used to measure the hardness of grease, petroleum jelly and pharmaceutical ointment products or other semi-solid materials. It plays an important role in the design, quality control and identification of product characteristics. Within 5 seconds of the test cone being released (or a custom time interval), the coning depth into the object being measured. Its unit is 0.lmm as a cone penetration. The greater the degree of penetration, the softer the sample, and the harder it is.
    The measurement method conforms to the national standard GB/T 269-1991, and has a compact structure design, liquid crystal display, automatic data acquisition and corresponding statistical calculation, and printout measurement report. Can output data to PC. The entire testing process is very simple and fully compliant with the National Pharmacopoeia. The measurement results are accurate, and it has good repeatability and system stability.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com