WSY-025X fully automatic asphalt softening point tester Introduction: The WSY-025X fully automatic asphalt softening point tester is a dual-medium, fully automatic testing instrument for asphalt softening point. It strictly adheres to national standards and highway engineering standards, allowing for one-click switching between water and glycerin media, and is suitable for high and low temperature testing in various scenarios. It is applicable for the softening point determination of road petroleum asphalt, coal tar pitch, liquid petroleum asphalt, etc., and is widely used in highway engineering, asphalt production enterprises, testing institutions, and research institutes. Features: 1. It adopts a 7-inch LCD color touch screen for control, featuring an aesthetic appearance and ergonomic design, making the testing process simple and intuitive to operate. 2. A ceramic glass electric hot plate with magnetic stirring is used, and the temperature control method adopts bottom heating, which meets the requirements of the new standard; the temperature rise rate is automatically controlled within the standard range (5±0.5℃/min) through PLC, and the temperature rise curve is displayed in real time. 3. Equipped with both high and low temperature testing modes, switchable, and featuring overtemperature protection. (1) When the softening point is ≤80℃, the temperature rise rate reaches and stabilizes at 5℃/min ± 0.5℃/min within 3 minutes; (2) When the softening point is greater than 80℃, after the test temperature reaches 60℃, the temperature rise rate stabilizes at 5℃/min ± 0.5℃/min. 4. Equipped with a magnetic stirring function to ensure uniform temperature within the beaker; the stirring speed is adjustable and equipped with a high-precision speed measurement device, displaying real-time speed (r/min) on the test interface. 5. Through photoelectric detection technology, automatic detection and recording of ball drop can be achieved without manual operation. The equipment features both manual and automatic detection modes, allowing for switching between modes according to actual testing needs. 6. The device features a multi-point temperature calibration function, which enables the displayed temperature to closely match the actual temperature measured by the thermometer through calibration. 7. The equipment is equipped with a cooling and heat dissipation system, which automatically starts to cool and dissipate heat after the test is completed The heating device achieves local and efficient heat dissipation, effectively reducing the interval time for the second test. 8. The equipment is equipped with a USB interface, allowing for the export of test data and temperature rise curve graphs. Technical Specifications: Temperature measurement range: 5℃~180℃ (when the softening point is ≤80℃: 5℃~90℃; when it is >80℃: 32℃~180℃) Temperature resolution: 0.1℃ Heating rate: 5℃/min ± 0.5℃/min Stirrer and oscillator size: Φ8×40mm Stirring speed range: 0r/min to 180r/min (adjustable) Steel ball diameter: 9.5mm Steel ball weight: 3.5 g ± 0.05g Beaker capacity: 800ml Rated total power: 1.5 kW Power supply voltage: AC (220±10%) V/50Hz Ambient temperature: 20~30℃ Relative humidity ≤ 80%RH Overall dimensions: 310×465×425mm
WSY-025X fully automatic asphalt softening point tester Introduction: The WSY-025X fully automatic asphalt softening point tester is a dual-medium, fully automatic testing instrument for asphalt softening point. It strictly adheres to national standards and highway engineering standards, allowing for one-click switching between water and glycerin media, and is suitable for high and low temperature testing in various scenarios. It is applicable for the softening point determination of road petroleum asphalt, coal tar pitch, liquid petroleum asphalt, etc., and is widely used in highway engineering, asphalt production enterprises, testing institutions, and research institutes.