WSY-025G-1 Fully automatic asphalt softening point tester Introduction: The WSY-025G-1 fully automatic asphalt softening point tester utilizes microcomputer control and photoelectric detection technology. The asphalt sample is loaded into a standard copper ring, a standard steel ball is placed on top, and the assembly is immersed in a specific medium (water or glycerin). The temperature is increased at a standard rate (5±0.5℃/min) through a PID temperature control system. When the asphalt softens and causes the steel ball to sink to a specified distance (25.4mm), the photoelectric sensor automatically captures and records the temperature at that moment, which is the asphalt softening point temperature (unit: ℃). The WSY-025G-1 fully automatic asphalt softening point tester is used to measure the softening point of materials such as road petroleum asphalt, coal tar pitch, liquid petroleum asphalt, and emulsified asphalt evaporation residues, and to evaluate the high-temperature stability and thermal deformation characteristics of asphalt. Features: 1. The temperature rise rate is controlled by a single-chip microcomputer at 5±0.5℃/min, ensuring accuracy. 2. Equipped with magnetic stirring. 3. Fully automated detection and recording of test data. 4. It can process 2 asphalt samples simultaneously without affecting each other. 5. The operation of the testing process is simpler and more intuitive. 6. Temperature correction and temperature compensation parameters are set to ensure consistency between temperature display and thermometer readings during the temperature rise process. 7. It can be applied to softening point testing for both low and high temperature ranges. Technical Specifications: Heating rate: 5±0.5℃/min Heating power: 1KW Steel ball mass: 3.5±0.05g Steel ball diameter: Ø9.53mm Ambient temperature: 5~35℃ Relative humidity: ≤80% Temperature range: 5~180℃ Power supply voltage: 220V Rated total power: 0.8kw Overall dimensions: 360×370×560 (mm)
WSY-025G-1 Fully automatic asphalt softening point tester Introduction: The WSY-025G-1 fully automatic asphalt softening point tester utilizes microcomputer control and photoelectric detection technology. The asphalt sample is loaded into a standard copper ring, a standard steel ball is placed on top, and the assembly is immersed in a specific medium (water or glycerin). The temperature is increased at a standard rate (5±0.5℃/min) through a PID temperature control system. When the asphalt softens and causes the steel ball to sink to a specified distance (25.4mm), the photoelectric sensor automatically captures and records the temperature at that moment, which is the asphalt softening point temperature (unit: ℃). The WSY-025G-1 fully automatic asphalt softening point tester is used to measure the softening point of materials such as road petroleum asphalt, coal tar pitch, liquid petroleum asphalt, and emulsified asphalt evaporation residues, and to evaluate the high-temperature stability and thermal deformation characteristics of asphalt.