WSY-025F-1 Asphalt Softening Point Tester Introduction: The WSY-025F-1 Asphalt Softening Point Tester is a professional asphalt testing equipment, utilizing the ring and ball method principle, specifically designed for determining the softening point temperature of various asphalt materials. This instrument is strictly designed and manufactured in accordance with the standard requirements of GB/T 4507 "Method for Determining the Softening Point of Petroleum Asphalt" and JTG 3410-2025 "Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering" under T0606 "Asphalt Softening Point Test". It is suitable for: road petroleum asphalt; coal tar pitch; residues after distillation or emulsification and evaporation of emulsified asphalt; polymer modified asphalt, and can be used for softening point testing at both high and low temperatures (water bath is suitable for temperatures below 80°C, and glycerol bath is suitable for temperatures below 157°C). Features: 1. A single-chip microcomputer is used to control the temperature rise rate at 5±0.5℃/min, ensuring accurate temperature rise rate. 2. Equipped with magnetic stirring. 3. It features a backlit LCD display. 4. The test results and temperature rise rate can be printed multiple times. 5. No preheating or automatic cooling is required, allowing for continuous experimentation. 6. The operation of the testing process is simpler and more intuitive. 7. Temperature correction and temperature compensation parameters are set to ensure consistency between temperature display and thermometer readings during the temperature rise process. 8. It is suitable for softening point testing under both high and low temperatures. Technical Specifications: Heating rate: 5±0.5℃/min Power supply voltage: 220v Heating power: 0.8KW Temperature range: room temperature to 180℃ Steel ball mass: 3.5±0.05g Steel ball diameter: Ø9.53mm Ambient temperature: 5~35℃ Relative humidity: ≤80% Overall dimensions: 300×370×370 (mm)
WSY-025F-1 Asphalt Softening Point Tester Introduction: The WSY-025F-1 Asphalt Softening Point Tester is a professional asphalt testing equipment, utilizing the ring and ball method principle, specifically designed for determining the softening point temperature of various asphalt materials. This instrument is strictly designed and manufactured in accordance with the standard requirements of GB/T 4507 "Method for Determining the Softening Point of Petroleum Asphalt" and JTG 3410-2025 "Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering" under T0606 "Asphalt Softening Point Test". It is suitable for: road petroleum asphalt; coal tar pitch; residues after distillation or emulsification and evaporation of emulsified asphalt; polymer modified asphalt, and can be used for softening point testing at both high and low temperatures (water bath is suitable for temperatures below 80°C, and glycerol bath is suitable for temperatures below 157°C).