Introduction: WKT-A5 intelligent trace moisture analyzer integrates a number of advanced production technologies. The measurement principle is the world-recognized classical method for water measurement [Karl-Fischer Coulomb method]. The measurement range is as low as 0.0001% (1ppm) Quickly measure liquids in seconds. solid. The moisture content in gas is widely used in chemical, petroleum, electric power, scientific research, railway and other industries. In chemical, petroleum, electric power, scientific research, railway and other industries, moisture content is one of the important indicators of product quality. A variety of built-in water content calculation formulas are convenient for different user needs; equipped with high-efficiency micro-printer, built-in large-capacity memory, can store 300 test records, convenient retrieval method, users can easily check and print test reports. Features: 1. The instrument adopts a single-chip microcomputer and a computer composite control system, and intelligent analysis and measurement; 2. Chinese and English touch LCD screen display, direct A/D sampling conversion of measurement electrode data, advanced single-chip control, intelligent analysis and measurement, and timely display of the working status of the instrument; 3. Special process design, the surface is treated with electrostatic spray, anti-corrosion, easy to clean; 4. The blank current microprocessor automatically controls the compensation, and the reagent can quickly reach the equilibrium state; 5. 0-430 mA large electrolytic current, high detection sensitivity and fast analysis speed; 6. Content calculation (2 formulas), 300 measurement results are automatically stored, and historical records can be consulted at any time; 7. Automatically calculate and print ug/ppm/percentage/mg/L/sample name/test date, etc.; 8. Multi-language display operation, the instrument program can be upgraded when the national standard is revised; Technical parameter: Item model number: WKT-A5 Measurement principle: Karl Fischer Coulomb method (coulometric method) Electrolysis rate: 2.4 mg water/min Electrolysis current: 0-430mA automatic control Display measurement range: 0.01 microgram water - 200 mg water Water content range: 0.0001% (1ppm)—100% Sensitivity: 0.01 microgram water (μg) Accuracy: When the water content is between 100 micrograms of water and 1000 micrograms of water, the error is ≤±3ug Display mode: Chinese and English touch LCD display Drift Compensation: Microprocessor automatic control Stirring speed: adjustable control End-point indication: On-screen display/Printout/Audio warning/End-point light indication Data input: touch screen operation input Sample number: The user can freely set the sample number Stored data: 300 Printing function: Built-in low-power high-speed thermal printer, 56mm paper width Print content: ug/ppm/mg/L/sample number/tester/date Calendar/Time: Display and print out the current time, date, detection time and date Power consumption: less than 40W Use environment: temperature 5℃-40℃, humidity ‹85% Host size: 309×302×175mm Power supply voltage: AC220V±10% 50HZ±2.5HZ
Introduction: WKT-A5 intelligent trace moisture analyzer integrates a number of advanced production technologies. The measurement principle is the world-recognized classical method for water measurement [Karl-Fischer Coulomb method]. The measurement range is as low as 0.0001% (1ppm) Quickly measure liquids in seconds. solid. The moisture content in gas is widely used in chemical, petroleum, electric power, scientific research, railway and other industries. In chemical, petroleum, electric power, scientific research, railway and other industries, moisture content is one of the important indicators of product quality. A variety of built-in water content calculation formulas are convenient for different user needs; equipped with high-efficiency micro-printer, built-in large-capacity memory, can store 300 test records, convenient retrieval method, users can easily check and print test reports.
