VM-6370T Vibration Tachometer Introduction: VM-6370T vibration tachometer shall be used for periodic motion measurement to detect the imbalance and deviation of moving machinery. It is specially designed for on-site measurement of various mechanical vibrations, so as to provide data for quality control, operation time and prior equipment maintenance. It can also be used as contact tachometer and photoelectric tachometer. characteristic: 1. It conforms to the international standard ISO2954 and is used for periodic motion measurement to detect the imbalance and deviation of moving machinery. 2. One meter is multi-purpose. One meter can be used as both a photoelectric tachometer for non-contact measurement and a contact tachometer for non-contact measurement. Speed RPM and frequency Hz can be measured. 3. It is specially designed for on-site measurement of various mechanical vibrations, so as to provide data for quality control, operation time and prior equipment maintenance. 4. High performance accelerometer is selected to achieve accurate and reproducible measurement. 5. Wide frequency range. Under acceleration mode, the frequency can reach 10Hz~10KHz. 6. With AC signal output, it is convenient for auscultation and recording. 7. Optional earphones can be used as stethoscope. 8. Use "USB data line output" and "RS-232 data line output" to communicate with PC. 9. Provide Bluetooth data output options. Technical parameter: Sensor :Piezoelectric vibration sensor Acceleration: 0.1m/s ²~ 400 m/s ² Peak 0.3ft/s ²~ 1312 ft/s ² 0.0g~40 g Speed: 0.01 mm/s~400 mm/s True RMS 0.04 inch/s~16.0 inch/s Displacement: 0.001mm~4.0 mm peak to peak 0.04ml~160.0 mil Frequency: 5 Hz~1k Hz Acceleration: 10 Hz~1k Hz 10 Hz~10k Hz (x10 mode is used for bearing inspection) Speed: 10 Hz~1k Hz Displacement: 10 Hz~1k Hz Rotating speed: 60RPM (r/min)~99990RPM (r/min) When "10" is displayed on the LCD, Accuracy: ± (5% n+2mm) characters Metric English Conversion: Convertible Output: 2.0 v AC load resistance 10 k Battery voltage indication: low voltage prompt Data output: USB Working conditions: temperature: 0 ° C~50 ° C Humidity:<90% RH Power supply: 4 No. 7 batteries Size: 140mmx72mmx34mm Weight: 380 g (without battery)
Introduction: VM-6370T vibration tachometer shall be used for periodic motion measurement to detect the imbalance and deviation of moving machinery. It is specially designed for on-site measurement of various mechanical vibrations, so as to provide data for quality control, operation time and prior equipment maintenance. It can also be used as contact tachometer and photoelectric tachometer.
