UPW-Q700C20 Fully Automatic Sample COD Analyzer Introduction: The UPW-Q700C20 fully automatic COD analyzer is widely used in various industries and departments that require water quality chemical oxygen demand (COD) measurement, such as environmental protection, water conservancy, agriculture, chemical industry, health and epidemic prevention, tap water, aquaculture, marine investigation, sewage treatment, etc. It can be applied to fixed laboratories or mobile monitoring vehicles. Features: 1. It fully complies with the "HJ/T 399-2007 Determination of Chemical Oxygen Demand in Water Quality - Rapid Digestion Spectrometric Method", with simple operation and accurate data 2. Full process automatic detection: automatic quantitative injection, automatic quantitative reagent addition, automatic temperature control digestion, automatic cooling, automatic detection, automatic waste discharge, automatic cleaning, without the need for manual contact with chemical reagents throughout the process, Safe and reliable, non professionals can also operate proficiently 3. Dual wavelength detection: According to standard requirements, high and low concentration samples are measured using different wavelengths, which makes the method more standardized and the data more accurate 4. Multiple pre-processing modules: built-in sample digestion, sample cooling, sample mixing and other modules to ensure a complete and standardized sample processing process 5. Quick batch automatic detection: supports testing multiple samples in one batch, with 3 built-in pre-processing units, and can detect one sample in an average of 8 minutes 6. High stability and good repeatability: High precision photoelectric sensors paired with powerful filtering circuits and optimization algorithms ensure data stability and repeatability 7. Automatic dilution of high concentration samples: After detecting high concentration samples that exceed the range, the instrument can automatically dilute the original sample and measure it again to obtain more accurate analysis results 8. Supporting specialized reagents and consumables: Provide specialized pre made reagents to eliminate users' troubles in dispensing and effectively ensure accurate detection 9. Equipped with a 7-inch high-resolution true color touch screen, user-friendly UI interface and buttons, clear display, simple and convenient operation 10. Equipped with an embedded printer, it integrates sample detection and data printing, and can automatically print real-time results and historical data 11. Equipped with large storage space, capable of storing 10000 sets of detection data for users to view, count or print in the future 12. Equipped with multiple communication interfaces such as USB/RS485/Bluetooth, it can connect with multiple devices to transmit data, facilitating data aggregation, statistics or monitoring Technical Specifications: Light source lifespan: 100000 hours Optical stability: ± 0.003Abs/10min Absorption range: 0.000-3.000 Abs Resolution: 0.001Abs Temperature control range: Room temperature~190 ℃ Number of curves: 100 Storage data: 10000 sets Display mode: 7-inch true color touch screen Communication interface: USB/RS485/Bluetooth, etc Printing method: Embedded printer Measurement range: 0-10000mg/L Measurement lower limit: 15.0 mg/L Measurement accuracy: ≤ 5% FS Batch processing samples: 20, 50, customized Number of pre-processing units: 3 groups Average sample testing time: 8 minutes
Introduction: The UPW-Q700C20 fully automatic COD analyzer is widely used in various industries and departments that require water quality chemical oxygen demand (COD) measurement, such as environmental protection, water conservancy, agriculture, chemical industry, health and epidemic prevention, tap water, aquaculture, marine investigation, sewage treatment, etc. It can be applied to fixed laboratories or mobile monitoring vehicles.
