TIME5301 Leeb hardness tester Features
Using D-type high-precision impact device
Richter principle, portable measurement
7 hardness values including Leeb (HL), Brinell (HB), Rockwell (HRC / HRB / HRA), Vickers (HV), and Shore (HS) can be measured at one time
A host (hardness tester) can be equipped with 7 different impact devices, no calibration is required when replacing, and automatic identification
The material can be selected through the menu, and the impact direction can be automatically identified without setting
Menu operation, easy and convenient operation
Full Chinese menu adopts 128 × 64 graphic dot matrix LCD display, backlight display, convenient operation
Can store 48 ～ 350 groups (impact times 32 ～ 1) measured value
Can set upper and lower limits, automatic alarm when out of range
On all display interfaces, you can press the [Help] key to get the operation prompt
Backlit display for easy use in dark environments
With indication soft calibration function
Print any test result
With RS232 interface Technical Parameters
Measuring range: (170 ～ 960) HLD (17.9-68.5) HRC
Measuring direction: 360 °
Indication repeatability: 6HLD (HLD = 760)
Hardness system: Leeb, Shore, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers
Indication error: ± 6HLD (when HLD = 760)
Operating temperature: 0 ℃ ～ 40 ℃
Print paper roll diameter: 40mm
Printing paper width: 44.5 ± 0.5mm
Charging time: 2 ～ 3.5 hours
Charging power supply: 12V / 600mmA
Relative humidity: ≤90%
Dimensions: 234 × 88 × 46mm
Weight: 0.6kg
TIME5301 Leeb hardness tester adopts D type high precision impact device. The material can be selected through the menu, and the impact direction can be automatically recognized without setting. TIME5301 Leeb hardness tester Leeb (HL), Brinell (HB), Rockwell (HRC / HRB / HRA), Vickers (HV), Shore (HS) and other 7 hardness values to achieve a single measurement
