Brief introduction:
This accord with GB/T16491-2008 series universal material testing machine, such as GB/T228-2002 standard, suitable for metal, non-metallic materials and composite materials mechanical properties and process performance test. For tensile, compression, bending, shear, peel, tear test, etc. According to GB, ISO, ASTM, JIS, DIN and other standards. Technical indicators:
Biggest test force: 300 kn (30000 KGF)
High precision level: 0.5 on the Richter scale are unlikely
The effective load range: 0.2% ~ 100%
Force measurement: the value plus or minus 0.005
Testing machine resolution: 1 / + 300000 yards, maximum load, not step inside and outside, and the entire resolution remains the same
Power system, servo motor and worm gear reducer
Screw configurations: high precision ball screw
Effective test width: 600 mm (can widen) according to the requirement
Stretching schedule: 800 mm (can be raised according to the requirement)
Test speed range: 0.01 to 500 mm/min (or custom)
Displacement measurement system: photoelectric encoder
The displacement measurement accuracy: the value for + / - 0.005
The deformation measurement system:
(extension) small deformation: the range of 25 mm, 50 mm and 100 mm
The deformation range: 5 mm, 10 mm, 25 mm
Large deformation: minimum range, deformation range: 10 mm to 800 mm
Deformation measurement precision: value for + / - 0.005
Test machine safety devices: electronic limit protection, stop switch and protection
Try lifting gear: fast/slow double speed automatic control, can point to move
Test units return function: automatic or manual returned at the highest speed test after the initial position
Overload protection: more than 10%, maximum load machine automatic protection
Fixture configuration: according to the sample requirements
The host size: 1100 * 900 * 900 mm
Motor, 380 v, 4 kw
Host weight: 1500 kg (about)
Brief introduction: This accord with GB/T16491-2008 series universal material testing machine, such as GB/T228-2002 standard, suitable for metal, non-metallic materials and composite materials mechanical properties and process performance test. For tensile, compression, bending, shear, peel, tear test, etc. According to GB, ISO, ASTM, JIS, DIN and other standards.
