Introduction: Total Rail Online Automatic Analyzer is an optical heavy metal online analyzer designed to comply with national environmental protection standards. It is applied to the simultaneous online analysis of various heavy metal elements in surface water, industrial process water and industrial waste water. The measured heavy metal elements include environmental protection. Department of "The 12th Five-Year Plan for Comprehensive Prevention and Control of Heavy Metal Pollution," and the Type 1 and Type 2 prevention and control of heavy metal projects. Measurement principle: trivalent iron ions in the water sample are reduced to ferrous ions by hydrogen amine hydrochloride. Under the action of the buffer, ferrous ions react with phenanthroline to form a colored complex, and the analyzer detects the color. Change and convert this change into total iron output. The amount of coloured complexes produced corresponds to the total iron content. Technical Parameters: Method basis: o-phenanthroline absorption spectrophotometry Measuring range: 0.00-5.00 mg/L Accuracy: ≥ 0.2 mg/L, no more than ±10%; <0.2 mg/L, not more than ±0.02 mg/L. Repeatability: no more than ± 5%; Stability: ≤±10% within 24h; Measurement period: The minimum measurement period is 30 minutes. Can modify the color development time in 5 ~ 120min Sampling period: time interval (any adjustable from 10 to 9999min) and the whole point measurement mode; Calibration cycle: Adjustable at any time between 1 and 99 days at any interval; Output: 4~20mA (2 channels) RS232, RS485; Environmental requirements: Temperature adjustable indoor, recommended temperature +5 ~ 28 °C; humidity ≤ 90% (non-condensing); Power source: AC220±10% V, 50±10% Hz, 5A; Size: high 1570 × width 500 × deep 450 mm; Other: abnormal alarm and power failure will not lose data, touch screen display and command input; after abnormal reset and power off calls, the instrument automatically discharges the residual reactants in the instrument and automatically restores the working status.
Introduction: Total Rail Online Automatic Analyzer is an optical heavy metal online analyzer designed to comply with national environmental protection standards. It is applied to the simultaneous online analysis of various heavy metal elements in surface water, industrial process water and industrial waste water. The measured heavy metal elements include environmental protection. Department of "The 12th Five-Year Plan for Comprehensive Prevention and Control of Heavy Metal Pollution," and the Type 1 and Type 2 prevention and control of heavy metal projects. Measurement principle: trivalent iron ions in the water sample are reduced to ferrous ions by hydrogen amine hydrochloride. Under the action of the buffer, ferrous ions react with phenanthroline to form a colored complex, and the analyzer detects the color. Change and convert this change into total iron output. The amount of coloured complexes produced corresponds to the total iron content.
