Introduction: This instrument is designed and manufactured in accordance with the requirements of the People's Republic of China industry standard SH / T 0193 "Lubricant Oxidation Stability Test (Rotating Oxygen Bomb Method)" and is suitable for the determination of (the base oil and additives) with the same composition And the oxidative stability of the turbine oil in use can also be used to evaluate the new mineral insulating oil containing 2,6-di-tert-butyl-p-cresol as a rapid assessment method for its oxidation stability. Features: 1, the instrument is also applicable to ASTM D 2272, D4742, IP229 standard, can be used for new oil, oil, steam turbine oil, lubricants, insulating oil and gasoline engine oil and other oxidation stability test. 2, the use of metal measuring bath, free of liquid medium, to reduce the test when the media oil exudes the unpleasant smell, put an end to the long time due to the risk of experiment. 3, single projectile independent operation design, each test a sample, making the test process with the ability to quickly turn around. 4, desktop design small size, simple ventilation, no need to place in the fume hood, exhaust and odor through the plastic pipe can be simply discharged. 5, the design of multiple online test software, more than simultaneously or control the operation of four instruments. 6, equipped with a sample temperature sensor components, can be measured in the process of real-time measurement of the sample temperature. 7, operating software stored in the U disk, ordinary computer can be used without additional procurement or modification of equipment. Technical indicators: 1, oxygen bombs and horizontal angle: 30 °. 2, heating tube power: 2500W. 3, work: single metal bath, each test a sample. 4, the pressure sensor range: (0 ~ 1.6) MPa, accuracy: ± 2 ‰. 5, test bath temperature control point: 140.0 ℃, 150.0 ℃. 6, test bath temperature control accuracy: ± 0.1 ℃. 6, rotation mechanism speed: (100 ± 5) r / min. 7, the working power: AC (220 ± 5%) V / 50Hz. 8, the whole power consumption: not more than 2600W. 9, ambient temperature: -10 ℃ o ~ 40 ℃. 10, the relative temperature: ≤ 85%. 11, Dimensions: 440 mm × 200 mm × 340 mm (length × width × height).
Introduction: This instrument is designed and manufactured in accordance with the requirements of the People's Republic of China industry standard SH / T 0193 "Lubricant Oxidation Stability Test (Rotating Oxygen Bomb Method)" and is suitable for the determination of (the base oil and additives) with the same composition And the oxidative stability of the turbine oil in use can also be used to evaluate the new mineral insulating oil containing 2,6-di-tert-butyl-p-cresol as a rapid assessment method for its oxidation stability.
