Brief introduction: Sp-max 2300A light absorption enzyme marker is suitable for life science research, especially DNA analysis. Can detect any standard 96 hole or uv-transmission 96 hole microhole plate. Built-in grating monochromator, continuous wavelength range is 190-900nm, step wavelength is 1nm. It provides three reading modes of terminal detection, dynamics and spectral scanning. It has the function of temperature control system and micro - hole plate. In addition, the photometric diameter of the microporous plate can be converted to that of a 1cm colorimetric plate. Main features: 1. Grating monochromator, with a continuous wavelength of 190nm to 1000nm, no need to purchase additional filters; 2. The OD value of the sample in the microporous plate can be converted to the OD value of the standard 1cm optical diameter colorimetric plate, and the DNA concentration can be directly calculated. 3. Provide four measuring and reading modes of terminal detection, dynamics, multi-wavelength and full-wavelength scanning; 4. Accurate results can be obtained with various enzyme marker plates, such as flat bottom plate, round bottom plate and tapered bottom plate. 5. It has the multi-point detection average technology, which can overcome the unevenness of test samples. 6. The advanced thermostatic and temperature breeding technology can accurately control the temperature in the sample cabin; 7. Powerful data analysis software to meet the requirements of spectral scanning and dynamic analysis; 8. High frequency sampling function, dynamic sampling up to 50 times per second, more accurate and smooth curve; 9. A full wavelength scan can be performed with only a few samples, making it a ultra-micro ultraviolet spectrophotometer. Main parameters: 1. Wavelength range: 190-1000nm (standard 190nm-900nm) 2. Wavelength selection: grating monochromator, adjustable 1.0nm step 3. Wavelength bandwidth: 2nm 4. Wavelength accuracy: < + / - 0.2nm 5. Measurement range: 0-4.000 OD 6. Determination of linear range :(405nm) 0-3.000 OD 7. Measurement accuracy (190nm - 900nm) : < + / - 0.0005OD 8. Measurement accuracy (190nm - 900nm) : < + / - 0.0003OD 9. Reading time of micro-orifice plate: end point method: 10 seconds; Dynamic method: the sampling frequency can be 50 times/second 10, operating temperature: room temperature + 1 ℃ to 65 ℃ (optional) 11. It has the function of vibration plate;(optional)
