SL-QN113 automatic pour point analyzer Introduction: The SL-QN113 automatic pour point analyzer is developed and produced based on standards GB/T510, ASTM D2386, GB/T3535, and ASTM D97. This instrument is suitable for measuring the pour point of lubricating oil and dark petroleum products. characteristic: 1. 10 inch true color touch LCD display, user-friendly human-machine interface, easy to operate. 2. High precision temperature control system can control the sample temperature from 50 ℃ to -70 ℃. 3. Fiber optic signal automatic detection with high accuracy and good repeatability. 4. The pour point and pour point both fully comply with the standard automatic tilt. 5. High performance compressor refrigeration with long service life. 6. The testing method is optional, which can be quickly detected or detected normally according to standard methods. 7. It has functions such as fault diagnosis and can prompt operations. 8. Expandable cold filter point unit, easy and fast to connect. 9. It has multiple communication interfaces and can be connected to the LIMS system through various communication methods. Technical parameters: Measurement range: Room temperature to -70 ℃ Measurement accuracy: ± 1 ℃ Resolution: 0.1 ℃ Display mode: 10 inch true color LCD display Detection hole positions: 2 (can be measured simultaneously) Detection method: photoelectric Repeatability: Condensation point: 2 ℃; Pour point: 3 ℃ Whole machine power: ≤ 1000W Dimensions: 800 × 600 × 650 (mm) Instrument weight: 80kg Working power supply: AC220V ± 10% 50Hz ± 10% Environmental temperature: 5 ℃~40 ℃ Relative humidity:<80% RH Other: There is no strong vibration, airflow, strong electromagnetic interference, or corrosive gas around the laboratory
Introduction: The SL-QN113 automatic pour point analyzer is developed and produced based on standards GB/T510, ASTM D2386, GB/T3535, and ASTM D97. This instrument is suitable for measuring the pour point of lubricating oil and dark petroleum products.
