SDCS-6LA Ultra-thin Door-mounted Energy Storage Dehumidifier Introduction: The SDCS-6LA ultra-thin door-mounted energy storage dehumidifier is a high-efficiency dehumidification device specially developed by our company for energy storage cabinets and electrical equipment. This device utilizes semiconductor refrigeration for dehumidification, actively drawing moist air from the enclosed space into the dehumidification duct with the assistance of a fan. The water vapor in the air condenses into water after passing through the semiconductor refrigeration mechanism, and is then discharged out of the cabinet through a water conduit, achieving a significant dehumidification effect. By reducing the moisture content in the air, both relative and absolute humidity are simultaneously lowered, with almost no increase in temperature, thus avoiding the negative impacts brought by temperature differences and preventing accelerated aging of components and the cabinet body due to high temperatures. The device has shifted from passive condensation prevention to active condensation guidance, effectively preventing potential safety hazards such as equipment aging, insulation strength reduction, secondary terminal breakdown, material mold growth, and steel structural component corrosion within the cabinet. This provides a solid guarantee for the safe operation of energy storage systems and power equipment. Features: 1. Ultra-thin door design: Specifically designed for storage cabinet door installation scenarios, the body is lightweight and thin, mounted on the cabinet door without occupying internal equipment space, facilitating convenient maintenance and operation. 2. Ultra-large dehumidification capacity: With a daily dehumidification capacity of up to 6L, it is suitable for large-space dehumidification needs such as energy storage containers and large energy storage cabinets, quickly reducing the humidity inside the cabinet. 3. Dedicated optimization for energy storage: Targeted optimization of dehumidification logic to adapt to all-weather operation scenarios of energy storage systems, ensuring a dry environment for battery and electrical compartments. 4. Intelligent control system: Switchable between automatic operation and manual dehumidification function, with adjustable temperature and dehumidification start values. 5. 24-hour real-time sampling: Humidity and temperature sensors perform 24-hour real-time sampling, and automatic condensation and dehumidification are initiated when the readings exceed the preset activation values. 6. Parameter memory function: The humidity and temperature settings have a memory function, ensuring that the settings are retained even when the device is turned off and on. 7. Quick fault localization: Equipped with a fault display function, it can quickly locate the fault point to ensure normal operation. 8. Shielding and isolation technology: Compliant with the Level 3 standard of GB/T 17626-2008, ensuring normal operation in strong electromagnetic field environments. 9. Flexible drainage method: The dehumidification condensate pipeline can either discharge the condensate water outside the cabinet or collect it outside the cabinet using a liquid storage bag. 10. Anti-corrosion design: The shell is made of sheet metal with plastic spraying or 304 stainless steel, suitable for corrosive environments such as coastal salt spray and chemical industries Technical Specifications: Model: SDCS-6LA Operating voltage: AC220V Dehumidification capacity: 6L/day (under operating conditions of 30°C and 80%RH) Maximum power: 154W Handling air volume: 65m³/H Shell material: sheet metal Dehumidification temperature: 5°C~55°C Operating temperature: -30℃~55℃ Applicable volume: 15~38m³ Body size: 432.5*313*61.7mm Weight: 7.0kg Installation method: flange installation/door installation inside the cabinet Communication mode: RS485 communication
SDCS-6LA Ultra-thin Door-mounted Energy Storage Dehumidifier Introduction: The SDCS-6LA ultra-thin door-mounted energy storage dehumidifier is a high-efficiency dehumidification device specially developed by our company for energy storage cabinets and electrical equipment. This device utilizes semiconductor refrigeration for dehumidification, actively drawing moist air from the enclosed space into the dehumidification duct with the assistance of a fan. The water vapor in the air condenses into water after passing through the semiconductor refrigeration mechanism, and is then discharged out of the cabinet through a water conduit, achieving a significant dehumidification effect. By reducing the moisture content in the air, both relative and absolute humidity are simultaneously lowered, with almost no increase in temperature, thus avoiding the negative impacts brought by temperature differences and preventing accelerated aging of components and the cabinet body due to high temperatures. The device has shifted from passive condensation prevention to active condensation guidance, effectively preventing potential safety hazards such as equipment aging, insulation strength reduction, secondary terminal breakdown, material mold growth, and steel structural component corrosion within the cabinet. This provides a solid guarantee for the safe operation of energy storage systems and power equipment.
