SDCS-4LD-B4L Ultra-thin Energy Storage Dehumidifier Introduction: The SDCS-4LD-B 4L ultra-thin energy storage dehumidifier is the fourth-generation semiconductor dehumidification device deeply customized by our company for the energy storage industry. With a daily dehumidification capacity of 4 liters, it is specifically designed for large enclosed spaces such as energy storage containers and battery compartments. This device employs a hybrid refrigeration technology combining semiconductors and compressors, transitioning from passive condensation prevention to active condensation guidance. A powerful fan draws moist air from the enclosed space into the dehumidification duct, where it is condensed into water by a high-efficiency refrigeration system and discharged through a water conduit. This effectively reduces the moisture content within the energy storage cabinet, preventing potential safety hazards such as battery terminal oxidation, insulation performance degradation, and condensation flashover. With a protection level of IP54, it operates in a wide temperature range from -25°C to 60°C, making it the preferred device for moisture prevention solutions in energy storage systems. Features: 1. Extraordinary dehumidification capacity, specifically designed for energy storage: With a daily dehumidification capacity of up to 4L, it effortlessly addresses the moisture issue in a 6m³ space within the energy storage cabin, effectively eliminating the risk of battery condensation. 2. Ultra-thin body, easy to install in narrow spaces: With an overall thickness of only 80mm, it can be embedded into the door panel or side wall of the energy storage cabinet, completely hidden within the cabinet structure, without occupying space for battery racks or electrical components. 3. Intelligent control system: Equipped with imported temperature and humidity sensors, it conducts real-time data sampling 24 hours a day, automatically initiates dehumidification when exceeding limits, and supports local manual, remote RS485, and wireless telemetry and remote control multi-mode switching. 4. Efficient refrigeration system: The specially designed low-temperature evaporator (down to -5℃) combined with large-area hydrophilic aluminum foil significantly enhances condensation efficiency, ensuring excellent dehumidification performance even in low-temperature environments. 5. Strong drainage: Equipped with a built-in micro self-priming drainage pump, it boasts a lift of up to 3m. Even if the drainage outlet is significantly higher than the machine body, it can smoothly drain the condensate water, adapting to the complex piping layout of the energy storage cabinet. 6. Wide temperature operation with strong environmental adaptability: It can start up and operate normally for dehumidification in extremely cold environments at -25℃, and the controller automatically reduces frequency for protection at high temperatures up to 60℃, fully covering the entire temperature range of the energy storage system operation. 7. Multiple protection functions: Equipped with overcurrent protection, overheat protection, fluorine deficiency protection, ultra-high water level alarm, and drainage pump fault self-checking, ensuring long-term safe operation of the dehumidification system. 8. Remote operation and maintenance: After selecting and configuring a 4G module, data upload to the cloud platform can be achieved. Remote monitoring of real-time humidity, total dehumidification capacity, equipment power consumption, etc. is possible, and fault information is automatically reported to the operation and maintenance center. 9. Professional anti-corrosion design: The evaporator fins are coated with a nano-hydrophilic anti-corrosion layer, combined with a stainless steel air deflector, significantly enhancing the service life in corrosive environments such as coastal salt spray and chemical plant rooms. 10. Low-noise operation: Equipped with a low-noise scroll fan and a fully enclosed compressor, the entire machine operates with a noise level below 45dB, ensuring no disruption to the comfort of inspection personnel around the energy storage cabin. Technical Specifications: Model: SDCS-4LD-B Operating voltage: DC24 Dehumidification capacity: 4L/day (under 30℃ and 80%RH conditions) Maximum power: 190W Shell material: sheet metal Dehumidification temperature: 5°C~40°C Applicable area: 15~38㎡ Body size: 437.5x176x90mm (height x width x depth) Installation method: External/embedded Communication mode: RS485 communication (optional) Certification method: CE
SDCS-4LD-B4L Ultra-thin Energy Storage Dehumidifier Introduction: The SDCS-4LD-B 4L ultra-thin energy storage dehumidifier is the fourth-generation semiconductor dehumidification device deeply customized by our company for the energy storage industry. With a daily dehumidification capacity of 4 liters, it is specifically designed for large enclosed spaces such as energy storage containers and battery compartments. This device employs a hybrid refrigeration technology combining semiconductors and compressors, transitioning from passive condensation prevention to active condensation guidance. A powerful fan draws moist air from the enclosed space into the dehumidification duct, where it is condensed into water by a high-efficiency refrigeration system and discharged through a water conduit. This effectively reduces the moisture content within the energy storage cabinet, preventing potential safety hazards such as battery terminal oxidation, insulation performance degradation, and condensation flashover. With a protection level of IP54, it operates in a wide temperature range from -25°C to 60°C, making it the preferred device for moisture prevention solutions in energy storage systems.
