SDCS-2F60 Ultra-thin Semiconductor Dehumidification Device Introduction: The SDCS-2F60 60W ultra-thin semiconductor dehumidification device is an ultra-thin dehumidification equipment specifically developed for energy storage and confined space scenarios. It is one of our core products, stemming from our company's over 20 years of deep experience in industrial equipment temperature and environmental control. This device employs a semiconductor refrigeration dehumidification method, actively drawing moist air from enclosed spaces into the dehumidification duct. The water vapor in the air is condensed into water after passing through the semiconductor refrigeration mechanism, and then discharged out of the cabinet through a water conduit, thus achieving the dehumidification effect of reducing the moisture content in the air. Compared to traditional heating dehumidification (passive prevention of condensation), this device adopts an active approach to guide condensation, effectively preventing potential safety hazards such as equipment aging, reduced insulation strength, secondary terminal breakdown, material mold growth, and steel structural component corrosion within the cabinet. This provides a solid guarantee for the safe operation of power systems and energy storage equipment. characteristic 1. Ultra-thin design, flexible installation: With a thickness of only 52.4mm, it is suitable for narrow and compact installation spaces such as energy storage cabinets and knife switch boxes. 2. Intelligent operation: Switchable between automatic operation and manual dehumidification function, with adjustable temperature start-up value and dehumidification start-up value. 3. Active condensation induction and dehumidification: The dehumidification duct actively induces condensation, discharges the gas, and heats it to reduce humidity, effectively achieving comprehensive moisture prevention and dehumidification in the enclosed space of the electrical cabinet. 4. 24-hour real-time sampling: Humidity and temperature sensors conduct 24-hour real-time sampling, and automatically initiate dehumidification if the readings exceed the preset activation threshold. 5. Memory function: The humidity and temperature settings have a memory function, so the settings will not be lost due to power off or on. 6. Rapid fault localization: Equipped with a fault display function, it can quickly locate the fault point to ensure normal operation. 7. Moisture-proof and flame-retardant design: Special moisture-proof components are used, and the shell is made of ABS material with flame-retardant effect, ensuring safe operation in humid environments. 8. Strong electromagnetic compatibility: Utilizing shielding and isolation technology, it meets the Level 3 standard of GB/T 17626-2008, ensuring operation in strong electromagnetic fields. 9. Flexible drainage method: The dehumidification condensate pipeline can discharge the condensate water out of the cabinet, and at the same time, a liquid storage bag can be used to collect the condensate outside the cabinet. Technical Specifications: Model: SDCS-2F60 Operating voltage: AC220V DC24V (optional) Dehumidification capacity: 500mL±5%/D (T=35°C, RH=85%RH) Maximum power: 60W Shell material: aluminum alloy Dehumidification temperature: 5°C~55°C Operating temperature: -30℃~55℃ Applicable volume: 1~1.5m³ Body size: 235.6x125x46mm (height x width x depth) Installation method: Wall-mounted/rail-mounted Communication mode: RS485 communication (optional) Certification methods: CE/ROHS2.0/REACH/EMC, salt spray test, dehumidification capacity test
SDCS-2F60 Ultra-thin Semiconductor Dehumidification Device Introduction: The SDCS-2F60 60W ultra-thin semiconductor dehumidification device is an ultra-thin dehumidification equipment specifically developed for energy storage and confined space scenarios. It is one of our core products, stemming from our company's over 20 years of deep experience in industrial equipment temperature and environmental control. This device employs a semiconductor refrigeration dehumidification method, actively drawing moist air from enclosed spaces into the dehumidification duct. The water vapor in the air is condensed into water after passing through the semiconductor refrigeration mechanism, and then discharged out of the cabinet through a water conduit, thus achieving the dehumidification effect of reducing the moisture content in the air. Compared to traditional heating dehumidification (passive prevention of condensation), this device adopts an active approach to guide condensation, effectively preventing potential safety hazards such as equipment aging, reduced insulation strength, secondary terminal breakdown, material mold growth, and steel structural component corrosion within the cabinet. This provides a solid guarantee for the safe operation of power systems and energy storage equipment.
