SDCS-10LD 10L Wall-mounted Energy Storage Dehumidifier Introduction: The SDCS-10LD 10L wall-mounted energy storage dehumidifier employs active dehumidification. The fan draws in moist air from within the cabinet, which is condensed into water by a semiconductor refrigeration mechanism and then discharged through a water conduit. This process barely increases the temperature inside the cabinet, thus avoiding the issue of condensation due to temperature differences. This device is primarily used for internal dehumidification of electrical equipment such as distribution cabinets and control boxes, preventing equipment malfunctions caused by excessive humidity. Features: 1. Intelligent control: Supports real-time monitoring of environmental temperature and humidity, and can automatically switch on and off according to set values. Some models or series also feature RS485 communication, allowing integration into monitoring systems. 2. Defrosting and Anti-Freezing: It will automatically detect and initiate defrosting in low temperature environments to prevent ice formation and ensure reliable operation of the equipment. 3. Dust-proof design: Equipped with a dust-proof net, facilitating easy cleaning and maintenance Technical Specifications: Model: SDCS-10LD Operating voltage: AC220V Dehumidification capacity: 10L/day (under working conditions of 30°C and 80%RH) Maximum power: 190W Shell material: sheet metal Dehumidification temperature: 5°C~40°C Applicable area: 15~38㎡ Machine size: 435x268x190mm (height x width x depth) Installation method: External plug-in/embedded Communication mode: RS485 communication (optional) Certification method: CE
SDCS-10LD 10L Wall-mounted Energy Storage Dehumidifier Introduction: The SDCS-10LD 10L wall-mounted energy storage dehumidifier employs active dehumidification. The fan draws in moist air from within the cabinet, which is condensed into water by a semiconductor refrigeration mechanism and then discharged through a water conduit. This process barely increases the temperature inside the cabinet, thus avoiding the issue of condensation due to temperature differences. This device is primarily used for internal dehumidification of electrical equipment such as distribution cabinets and control boxes, preventing equipment malfunctions caused by excessive humidity.
