Brief introduction The device can be used for multi- group gas injection , gas distribution function has analog , mixed gas can be sufficiently preheated , the application may be implemented in the adsorption test under constant temperature , the adsorbed substance desorbing can be achieved under high temperature experiments Features 1. The catalytic reaction can be applied to multi-component gas mix
2. pressure exhaust gas treatment can be carried out through simulation experiments with gas installations
3. have a combustible gas warning device to increase the safety level laboratories
4. Intelligent gas distribution model for flow adjustment and pneumatic control software
5. Anti-condensation system piping Technical parameters 1. reactor : room temperature ~ 600 ℃ 2. Design pressure: pressure
3. The maximum flue gas flow rate : 10L / min ( according to the experimental requirements may change )
The reactor size : 30 * 200 mm ( according to the experimental requirements)
5. pneumatic control : 5-way gas feed control ( with intelligent online gas distribution function can be simulated with gas ; each has a separate gas line mass flow controller ) ; 6.MFC Repeatability : ± 0.2%
7. Mixed tank : spoiler patented technology to improve the accuracy of mixed gas line
8. gas distribution program : according to demand , to achieve the flow of gas in each group can be programmed to adjust , namely software programming flow control
9. pressure control accuracy: process operating pressure 24 hours constant pressure ≤0.05Mpa
10. Temperature control system : Japan imports originating temperature control system . Precision temperature control furnace , the reaction temperature in order to ensure its precision , disposed inside the reactor tube core thermocouple , the temperature of the catalyst reaction in order to ensure the central region . 11. Temperature control accuracy : temperature setpoint and actual display error <1 ℃ 12. reactor structure : You can open clamshell
13. The pipe valves : 316L stainless steel corrosion-resistant materials , and the use of Φ3, Φ6 GB Universal Interface
Brief introduction The device can be used for multi- group gas injection , gas distribution function has analog , mixed gas can be sufficiently preheated , the application may be implemented in the adsorption test under constant temperature , the adsorbed substance desorbing can be achieved under high temperature experiments
