RJD-10 pressure-sensitive adhesive solubility tester Introduction: The RJD-10 solubility analyzer is designed for the measurement of adhesive solubility, and can also be used for bacterial culture, fermentation, hybridization, biochemical reactions, enzyme and cell tissue research that require high temperature and oscillation frequency. characteristic: 1. High strength and high-performance mechanical transmission design, able to operate smoothly even under overload conditions. 2. It has a power-off recovery function, which allows the device to automatically resume operation according to the original set program after the external power supply suddenly loses power and resumes power. 3. Double over temperature protection design, when the heater component has a low water level and the test sample is overheated, the host can automatically cut off the heating power supply. 4. The PI type temperature control design of the microprocessor chip has good temperature control linearity, small fluctuations, and a temperature uniformity of 0.1 ℃. 5. The LCD screen displays the set temperature and actual temperature. 6. It has a memory function for operating parameters, which can avoid repetitive and tedious operations. 7. Microprocessor chip frequency control, LCD display shows the set frequency and actual frequency. 8. Complete timing setting function, with any time setting between 1 minute and up to 500 hours. The timing endpoint equipment can automatically shut down and emit sound and light alarms. When the measured temperature deviates from the set temperature by 3 ℃, the host automatically stops heating and emits an audible alarm. 10. The side of the water bath is equipped with a drainage valve. 11. Imported stainless steel inner liner, stainless steel electric polishing shaking plate, spring, flask clamp. 12. Flexible and convenient detachable rocker panel components with diverse specifications. Technical parameters: Model: RJD-10 Rotation frequency: 20-250r/min ± 10% Amplitude: 24mm Configuration: 250ml x 10 pieces Swing size: 450 × 260 (mm) Timing range: 500 hours Digital display mode: LCD Temperature control range: greenhouse+5 ℃ -99.9 ℃ Temperature control accuracy: ± 0.1 ℃ Temperature uniformity: ± 0.5 ℃ (during oscillation) Power: 1270W/1550W Power supply: AC220V ± 10% 50Hz ± 2% Oscillation mode: round-trip
Introduction: The RJD-10 solubility analyzer is designed for the measurement of adhesive solubility, and can also be used for bacterial culture, fermentation, hybridization, biochemical reactions, enzyme and cell tissue research that require high temperature and oscillation frequency.
