Introduction: The QIMO-2000D laboratory low-temperature spray dryer is specially developed for the thermal materials in the research and development department of Shanghai Qimo. The whole machine is compact in design and self-contained, and can be operated without other facilities. One-button start-up, color large LCD touch screen operation, can be fully automatic or manual monitoring two operating modes, convenient operation and monitoring of the experimental process, especially the instant drying of materials under low temperature conditions (40 °C), for heat sensitive materials It provides extremely convenient and extremely safe drying methods, such as biological products such as enzyme preparations, natural extracts of natural medicines with high sugar content, heat-resistant polymer materials, materials that are heated and vaporized, and the like. Applications: Beverages, fragrances and pigments, milk and egg products, plant and vegetable extracts, pharmaceutical synthesis, heat sensitive materials, polymers and resins, fragrances, blood products, ceramics and superconductors, biochemicals, dyes, chemicals Materials, soaps and detergents, food binders, oxides, bone powders and tooth powders, especially for natural product extracts with high sugar content, heat-resistant polymer materials, materials for heat and gasification, etc. Powder granulation effect. Features: 1. Spray drying The whole experimental process is completed in a vacuum environment, which greatly reduces the drying temperature of the material and solves the problem of spray drying of heat sensitive materials. 2. Color touch screen operation: heating temperature PID constant temperature control, peristaltic pump feed speed can be adjusted at any time. 3. Built-in imported oil-free air compressor, the diameter of the powder spray is normally distributed, the fluidity is very good, and the noise is very low, in line with the national small noise standard; 4. The atomization structure of the two-fluid spray is precision-made with high-quality stainless steel material, compact design, no need for auxiliary equipment, convenient to use, and lasts for a long time. 5. In order to meet the requirements of the user to adjust various parameters in the experimental range, the real-time regulation PID constant temperature control technology is adopted in the design of the drying temperature control, so that the temperature control in the full temperature zone is accurate, and the heating temperature control precision is ±1 °C. 6. The feed amount can be adjusted by the feed peristaltic pump, the rated treatment capacity is 2000mL/H. Technical Parameters 1. The whole machine is made of stainless steel, and the atomization structure of the two-fluid spray 2. Built-in imported oil-free air compressor; 3. The spray head is a concentric spray head. When atomizing, ensure that there is no eccentricity and it is sprayed to the side of the bottle wall. After the spray head is installed, it can be moved up and down to facilitate the adjustment of the atomization position to improve the spray drying effect; 4. Minimum sample size: 50mL (depending on the difference in solid content of the material); 5. Real-time regulation of PID constant temperature control technology, heating temperature control accuracy: ± 1 ° C; 6. Nozzle diameter: 0.5mm, 0.7mm, 1mm, 1.5mm, 2mm optional, and can be customized according to customer requirements; 7. Instant spray drying at low temperature (minimum 40 ° C), the moisture content after drying is less than 1%. Under such dry conditions, the easily oxidizable, volatile and heat sensitive materials can maintain the chemical structure well. Biological activity 8. Vacuum degree -0.05 ~ 0.06MPA; 9. Color LCD touch screen operation control, full Chinese operation interface. 10. The spray head is located in the middle of the drying chamber, which can be flow-flowed and dried. It can also be counter-flow dried. It can extend or shorten the drying time according to the material characteristics, and is more suitable for heat sensitive materials.
Introduction: The QIMO-2000D laboratory low-temperature spray dryer is specially developed for the thermal materials in the research and development department of Shanghai Qimo. The whole machine is compact in design and self-contained, and can be operated without other facilities. One-button start-up, color large LCD touch screen operation, can be fully automatic or manual monitoring two operating modes, convenient operation and monitoring of the experimental process, especially the instant drying of materials under low temperature conditions (40 °C), for heat sensitive materials It provides extremely convenient and extremely safe drying methods, such as biological products such as enzyme preparations, natural extracts of natural medicines with high sugar content, heat-resistant polymer materials, materials that are heated and vaporized, and the like. Applications: Beverages, fragrances and pigments, milk and egg products, plant and vegetable extracts, pharmaceutical synthesis, heat sensitive materials, polymers and resins, fragrances, blood products, ceramics and superconductors, biochemicals, dyes, chemicals Materials, soaps and detergents, food binders, oxides, bone powders and tooth powders, especially for natural product extracts with high sugar content, heat-resistant polymer materials, materials for heat and gasification, etc. Powder granulation effect.
