QG-4A Multifunctional Cutting Machine(Quick Clamp)

Position: Home > > Lab general equipment > Sample preparation and digestion > Cutting machine > QG-4A Multifunctional Cutting Machine(Quick Clamp)

QG-4A Multifunctional Cutting Machine(Quick Clamp)

Product ID：SYZYXJqg044

Price: Please inquire PDF Format

Supply Ability:80 SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberQG-4A

Brand NameSHANGHAIJINXIANGJIXIE

Payment TermsT/T, paypal

QG-4A Multifunctional Cutting Machine(Quick Clamp)
Introduction
This machine is suitable for various metallographic materials. The cutting thickness of the material can be adjusted by the lateral movement of the cutting table, and then the sample can be cut by the longitudinal movement of the spindle, which has strong cutting ability and convenient operation. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
It is suitable for cutting bar with diameter less than 65mm.

Technical Parameters

Model	QG-4A
Cutting Method	Manual, Spindle feeding along Y axis
Cut-off Wheel	Φ250×2×Φ32mm
Max. Cutting Capacity	65×65mm
X Axis Travel	45mm
Y Axis Travel	270mm
Spindle Speed	2800r/min
Electromotor Power	1.5kW
Cutting Table	130×190mm，T-slot 12mm
Clamping Tool	Quick clamp，Jaw height 60mm
Power Supply	380V, 50Hz，6A, Three-phase four-wire
Dimensions	700×520×1110mm
Net Weight	170kg
Water Tank Capacity	60L
Pump Flow	25L/min
Water Tank Dimensions	565×360×600mm
Water Tank Weight	27kg

QG-4A multi-energy cutting machine is suitable for cutting various metallographic sample materials. The QG-4A multi-energy cutting machine is equipped with a circulating cooling system. The surface of the cut sample is bright and flat without burns, which is the ideal equipment for cutting the sample.