Introduction: 1. The machine is suitable for cutting irregular metallographic specimens such as cylinders and polygons to observe the metallographic and petrographic structure of the material. Double enclosure fully enclosed structure. Samples can be cut in absolute safety. 2. This machine has a strong cooling system. The use of a configured coolant removes the heat generated during cutting, avoiding overheating of the specimen and damaging the specimen tissue. When cutting, the sample can be arbitrarily rotated to avoid slight burns on the surface when the sample is cut. At the same time, the cutting section is increased, and the utilization of the cutting wheel is improved. 3. The machine is easy to use, safe and reliable, and it is one of the necessary equipment for making samples in factories and research institutes. Technical Parameters; 1, the maximum cutting diameter: Φ65mm 2, speed: 2800 rev / min 3, grinding wheel specifications: 250 × 1.5 × 32mm 4, power supply: 380V, 50HZ 5, motor: 1.5KW 6. Overall dimensions: 870×550×1120mm
Introduction: 1. The machine is suitable for cutting irregular metallographic specimens such as cylinders and polygons to observe the metallographic and petrographic structure of the material. Double enclosure fully enclosed structure. Samples can be cut in absolute safety. 2. This machine has a strong cooling system. The use of a configured coolant removes the heat generated during cutting, avoiding overheating of the specimen and damaging the specimen tissue. When cutting, the sample can be arbitrarily rotated to avoid slight burns on the surface when the sample is cut. At the same time, the cutting section is increased, and the utilization of the cutting wheel is improved. 3. The machine is easy to use, safe and reliable, and it is one of the necessary equipment for making samples in factories and research institutes.
