Sales QG-3 Metallographic Sample Cutting Machine，Manufacturer

Position: Home > > Lab general equipment > Sample preparation and digestion > Cutting machine > QG-3 Metallographic Sample Cutting Machine

QG-3 Metallographic Sample Cutting Machine

Product ID：SYZYXJqg045

Price: Please inquire PDF Format

Supply Ability:80 SETS/MON

Port:SHENZHEN

Product Introduction
Other information

Model NumberQG-3

Brand NameSHANGHAIJINXIANGJIXIE

Payment TermsT/T, paypal

G-3 Metallographic Sample Cutting Machine
Introduction
This machine is suitable for general metallographic and lithofacies materials. By pulling the spindle and using the spindle gravity to cut the sample, the speed is high and the cutting ability is strong. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, while there is an opening in the left of the cover which can cut long strip samples, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting. This model is divided into benchtop and floor type for customers to choose.
QG-3 metallographic sample cutting machine is suitable for cutting bar materials with a diameter of less than 85mm.
Features
1. Manual cutting, convenient and quick
2. Desktop vertical 2 styles are available
3. The left hole can hold long bars
Technical Parameters

Model	QG-3
Cutting Method	Manual
Cut-off Wheel	Φ300×2×Φ32mm
Max. Cutting Capacity	85×85mm
Spindle Speed	2800r/min
Electromotor Power	3kW
Cutting Table	204×240mm，T-slot 12mm
Clamping Tool	Quick clamp，Jaw height 60mm
Power Supply	380V, 50Hz，10A, Three-phase four-wire
Dimensions	730×700×540mm （750×730×1200mm floor type）
Net Weight	125kg（180kg floor type）
Water Tank Capacity	60L
Pump Flow	25L/min
Water Tank Dimensions	565×360×600mm
Water Tank Weight	27kg

Introduction
This machine is suitable for general metallographic and lithofacies materials. By pulling the spindle and using the spindle gravity to cut the sample, the speed is high and the cutting ability is strong. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, while there is an opening in the left of the cover which can cut long strip samples, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting. This model is divided into benchtop and floor type for customers to choose.
QG-3 metallographic sample cutting machine is suitable for cutting bar materials with a diameter of less than 85mm.