Introduction: This machine is mainly used for cutting foam materials. It can cut rigid foam and soft foam into squares, rectangles, strips, etc. It has the advantages of high cutting efficiency, accurate cutting size, and high precision. Features: 1. The machine is equipped with a movable cutting and adjusting device. In order to ensure the dimensional accuracy of the cutting material, it is equipped with a digital display ruler. 2. The movable worktable can also fix the cut foam. 3. The red brake button is used for manual braking. This button is invalid when the start button is pressed. 4. When the brake electromagnet is closed, press the start button and the brake electromagnet will release immediately. technical parameter: Cutting display resolution: 0.01mm Cutting size accuracy: according to the difference of the tool and the sample, the accuracy is different Cutting knife with flat knife: cutting sponge soft foam material, insulation foam board material, accuracy: ±0.5mm; ②Cutting knife with serrated knife: cutting polyurethane rigid foam material, accuracy: ±1mm Worktable size: 1200×800mm; The effective stroke of the movable worktable is: 500mm; Power supply voltage: AC 380V 50HZ Cutting size (mm): Minimum: 25×25×10 Maximum: 500×400×200 Effective adjustment distance of the left baffle: 400mm
Introduction: This machine is mainly used for cutting foam materials. It can cut rigid foam and soft foam into squares, rectangles, strips, etc. It has the advantages of high cutting efficiency, accurate cutting size, and high precision.
