Position: Home > > Physical property test > Testing machine > Adhesion tester > PT-503 normal temperature type viscosity tester

PT-503 normal temperature type viscosity tester

Product ID:WSHfz031

Price: Please inquire PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberPT-503
    Brand NamePUSAITE
    Payment TermsT/T, paypal
    PT-503 normal temperature type viscosity tester
     
    Introduction:
    PT-503 normal temperature type viscosity tester is suitable for adhesive test of adhesive tape, protective film, label, plaster, medical patch, etc., the displacement of the sample after a certain time or the time when the sample is completely detached To characterize the ability of the adhesive sample to resist pull-off.
    Standards compliant:
         GB 4851 Pressure-sensitive adhesive tape holding test method
         Standard Test Method for Shear Viscosity of ASTM D3654 Pressure Sensitive Tape
         JIS Z0237 Test method for pressure sensitive adhesive tape and pressure sensitive adhesive sheet
    Features:
    1. Exquisite test board: the test board needs to be attached 25mm away from the end face. In order to reduce the impact of the tester's operation error, each test board is marked with a marking line at the factory to facilitate the tester's foolish operation; the test surface is strict According to the standard requirements of 50nm roughness, it is ensured that accurate test results can be obtained.
    2.Precision weight: The standard weight of the instrument is made of high-quality steel, which is processed by precision, which is better than the standard weight error; the surface of the weight adopts the advanced hard chrome plating process at the present stage to greatly improve its corrosion resistance. Wear resistance and superior gloss.
    3. Independent groove design: Each station adopts independent groove design, which does not interfere with each other, and the corresponding timing system and start button are arranged in order, so that the readings are concise and clear.
    4. Accumulating time device: using the time-consuming device produced by the first-line brand manufacturer, the precision of the time is better than 0.01%; the built-in lithium battery design does not require an external power supply, and the service life is up to 5 years.
    5. Multi-layer plastic spray: The body of the instrument adopts multi-layer spray treatment process to ensure that the appearance is still new and the surface is more wear-resistant after many years of use.
    Technical Parameters:
    Standard pressure roller:  2000g±50g
    Weight:  1000g±10gContains load plate weight
     Test board:  70mm (L)×50mm(W)×1.7mm(D)
    Timing range:  09999h
     Test station:  6
    Dimensions:  600mm(L)×240mm(W)×420mm(H)
    power supply:  /
    Weight:  18kg
    Standard configuration: Host + weight + test board + loading board + pressure roller
    Optional configuration:     NIST SRM1810A  Fiberboard, flat test stand
     
  • Introduction:
    PT-503 normal temperature type viscosity tester is suitable for adhesive test of adhesive tape, protective film, label, plaster, medical patch, etc., the displacement of the sample after a certain time or the time when the sample is completely detached To characterize the ability of the adhesive sample to resist pull-off.
    Standards compliant:
         GB 4851 Pressure-sensitive adhesive tape holding test method
         Standard Test Method for Shear Viscosity of ASTM D3654 Pressure Sensitive Tape
         JIS Z0237 Test method for pressure sensitive adhesive tape and pressure sensitive adhesive sheet
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com