PrepP-01L Ultralight Manual Hydraulic Press Introduction: The PrepP-01L manual hydraulic press can be used for X-ray fluorescence spectroscopy and infrared sample compression. It uses a pointer pressure gauge to monitor pressure changes in real-time, accurately and reliably. The main body is made of ultra light superhard material, which reduces the weight by 50%, and is more suitable for field or field sample preparation. The device is compact and can be placed on a desktop, with a maximum pressure of up to 20T. characteristic: 1. The maximum pressure is 20T, which has sample preparation performance comparable to conventional presses. 2. Reduce weight by 50%, making it more suitable for portable use in the wild or on site. 3. Small size, can be placed on a desktop without the need for a dedicated sample room. 4. Efficient manual rod transmission design to improve sample preparation efficiency. 5. Equipped with superhard wear-resistant special alloy steel molds, with a long service life, and a key part smoothness of Ra0.4, the resulting pressed surface is flat. 6. The use of ultra-thick steel plates and large diameter handwheels saves labor and provides more reliable performance. Technical parameters: Model: PrepP-01L Maximum pressure: 20T Working mode: manual Working pressure: 0-20T Working temperature requirement: 0-40 ℃ Pressure regulation accuracy: 0.1T Hydraulic oil: anti wear hydraulic oil 46# Size (L × W × H) ： 300 × two hundred and fifty × 600mm Net weight: 25kg
Introduction: The PrepP-01L manual hydraulic press can be used for X-ray fluorescence spectroscopy and infrared sample compression. It uses a pointer pressure gauge to monitor pressure changes in real-time, accurately and reliably. The main body is made of ultra light superhard material, which reduces the weight by 50%, and is more suitable for field or field sample preparation. The device is compact and can be placed on a desktop, with a maximum pressure of up to 20T.
