PGO-300 Oxygen Generator Introduction: The PGO-300 oxygen generator is widely used in laboratory analysis and testing departments such as petroleum, chemical, coal, power, and universities. A high-purity oxygen generator is composed of an electrolytic separation cell, a switch power supply, a liquid storage tank, pressure control, drying and purification, flow display, liquid level alarm, condensation and other systems. The "heart" electrolytic separation cell of this instrument is a cylindrical structure. Oxygen production and hydrogen discharge can be carried out simultaneously, with the advantages of large electrolysis area, low pool temperature, good performance, and high purity. This instrument is equipped with a reflux device, which can effectively ensure that there is no reflux phenomenon in the instrument. Characteristics: 1. Easy to operate, just turn on the power switch to produce gas, stable output pressure, and flow rate displayed by LED digital display, more intuitive and eye-catching. 2. Daily use only requires the addition of distilled water, which can be used continuously or intermittently. 3. The instrument uses power supply in series with battery technology, which can effectively reduce the temperature inside the pool. 4. Equipped with a reflux device, it can effectively ensure that the instrument has no reflux phenomenon. 5. A gas condensation device is installed to effectively remove moisture from the gas path, ensuring the quality of the gas used. 6. There is a liquid shortage alarm device, which is safe and convenient to use. Technical parameters: Power supply voltage: 220V 50Hz Gas purity: 99.995% (relative oxygen content) Output flow rate: 0-300 ml/min Output pressure: 0.35Mpa (if special pressure is required, notify the manufacturer before leaving the factory to determine otherwise) Maximum power: 160W Environmental temperature: 0-40 ℃ Relative humidity<85% Environmental conditions: No large amount of dust or corrosive gases Dimensions: 370 × 180 × 360mm (L × W × H) Weight: Approximately 17Kg
Introduction: The PGO-300 oxygen generator is widely used in laboratory analysis and testing departments such as petroleum, chemical, coal, power, and universities. A high-purity oxygen generator is composed of an electrolytic separation cell, a switch power supply, a liquid storage tank, pressure control, drying and purification, flow display, liquid level alarm, condensation and other systems. The "heart" electrolytic separation cell of this instrument is a cylindrical structure. Oxygen production and hydrogen discharge can be carried out simultaneously, with the advantages of large electrolysis area, low pool temperature, good performance, and high purity. This instrument is equipped with a reflux device, which can effectively ensure that there is no reflux phenomenon in the instrument.
