PGA-30L air generator Introduction: The PGA-30L air generator uses an advanced low-noise compressor as the air source; The instrument is equipped with a voltage regulator, and the purification system consists of a filter, steam water separation, and precision filter, which can effectively remove impurities and water molecules from the air. It can be used as a gas supply source for various models of gas chromatographs, flame photometers, evaporative emission lamps, and nitrogen generators at home and abroad, replacing steel cylinders to make your work more convenient. characteristic: 1. It can replace traditional high-pressure air bottles and make laboratories instrument. 2. Easy to operate, just turn on the power switch to produce gas, can be used continuously or intermittently. 3. The gas path system is set to three levels of purification. 4. Equipped with a voltage regulator device, 5. Equipped with overvoltage protection and automatic drainage device, it is safe and convenient to use. 6. Equipped with normal pressure start-up, it can extend the service life. Technical parameters: Working conditions: Power supply voltage: 230V 50Hz Environmental temperature: 5-40C °, relative humidity ≤ 70% No significant dust and corrosive gas pollution. Air purity: oil-free three-level purification Output flow rate: 0-30L/min Output pressure: 0-0.4Mpa output Noise: ≤ 58 decibels Rated power: 1000W Dimensions: 630 × 360 × 660mm (L × W × H); Weight: Approximately 42Kg
Introduction: The PGA-30L air generator uses an advanced low-noise compressor as the air source; The instrument is equipped with a voltage regulator, and the purification system consists of a filter, steam water separation, and precision filter, which can effectively remove impurities and water molecules from the air. It can be used as a gas supply source for various models of gas chromatographs, flame photometers, evaporative emission lamps, and nitrogen generators at home and abroad, replacing steel cylinders to make your work more convenient.
