Introduction: The laboratory organic solvent spray dryer system uses a closed design, mainly used in organic solvent solutions, and N2 is dried as an inert gas to make the equipment run safer. The product has no oxidation, good quality, good uniformity of particle bulk and average particle size, and its fluidity can meet the continuous production of automatic press, and the solvent medium can be recycled online. The solvent evaporation capacity under the specified conditions is 1-2 L/h (according to the solid content of the material). The whole set of equipment consists of feeding system, atomizer, electric heater, drying tower, cyclone dust collector, condensation tower, explosion-proof device, online oxygen detection system and electrical control system. Features: 1. Dry material: Suitable for a variety of materials, such as chemical, pharmaceutical, new energy industries. 2. Solvent type: organic solvent (alcohol, ethanol, acetone and other organic solvents) 3. Circulating gas: N2 nitrogen (avoid material oxidation) 4. Solvent evaporation: 1-2kg/h 5. Slurry solid content: slurry: <20% (self-adjustable) 6. Slurry pH: Neutral 7. Slurry temperature: normal temperature 8. Drying tower inlet air temperature: 80~90°C (temperature adjustable, customizable) 9. Drying tower outlet temperature: 50~60°C 10. Finished product: powder 11. Product residual moisture content: <3% (about) 12. Power supply: 380/220V 50Hz 13. Heating method: electric heating, can do electric heat exchange 14. Atomization method: two-fluid atomizer 15. Receiving method: main tower + cyclone separator 16. Dust removal method: whirlwind 17. Solvent recovery method: condensation recovery Technical Parameters: 1 treatment volume: 1-2Kg / h liquid, according to solid content 2 electric heating power: 6Kw 3 peristaltic pump: adjustable flow 4 condensation temperature: 5-7 ° C 5 tower oxygen content: ≤ 3% 6 solvent recovery rate: ≥95% 7 dryer size: Φ1500 × 1100 × 890
Introduction: The laboratory organic solvent spray dryer system uses a closed design, mainly used in organic solvent solutions, and N2 is dried as an inert gas to make the equipment run safer. The product has no oxidation, good quality, good uniformity of particle bulk and average particle size, and its fluidity can meet the continuous production of automatic press, and the solvent medium can be recycled online. The solvent evaporation capacity under the specified conditions is 1-2 L/h (according to the solid content of the material). The whole set of equipment consists of feeding system, atomizer, electric heater, drying tower, cyclone dust collector, condensation tower, explosion-proof device, online oxygen detection system and electrical control system.
