Introduction: MTS Computer Servo Hydraulic Horizontal Tensile Testing Machine is for long test materials such as wire, cable, bamboo steel, steel cable, steel wire, steel cable, iron chain, chain, spring, webbing, rope, metal fastener, etc. The tensile test is specially designed. In addition to the servo-hydraulic models, there are also brain-type traditional hydraulic manual control methods, or with the economical type of electronic display options. The servo horizontal tensile testing machine adopts the frame steel plate welded frame structure. The single-outlet double-acting piston cylinder applies the test force by moving the cross beam pull rod and the reverse frame consisting of the front slider. The sample is connected through the pin axis and the high-precision load Sensor force measurement, according to the length of the sample specifications can be adjusted to adjust the size of the slider after stretching space, rear slider with electric deceleration adjustment, manual pinning fixed on both sides of the frame, for the computer screen display test force and test curve, according to the test method The request automatically processes test data. Features: 1. The servo horizontal tension testing machine adopts high-precision, all-digital speed control system and precision reducer to drive the precision screw to perform the test, to achieve a wide range of test speed adjustment, low noise during the test, and stable operation. 2. The universal joint adopts a cross pin structure and has a swing angle limiting function. On one hand, it is convenient for the sample to be clamped and the test concentricity is ensured. On the other hand, the influence of the irregular sample on the sensor is well eliminated. 3, key operation mode, LCD display real-time display. The display interface can display the test method selection interface, test parameter selection interface, test operation and result display interface and curve display interface, which is convenient and quick. 4. It can realize the adjustment of the speed and height of the beam when the sample is clamped. It has overcurrent, overvoltage and overload protection devices. . 5, optional computer interface, external computer to achieve the test process control and data storage, printing. Technical Parameters: 1. The maximum test force: 2000KN (200T) 2. Force measurement range: 1%-100%FS; 3. Test force accuracy: ± 1%; 4. Test space (excluding piston stroke): 0-10m adjustable 5. Servo cylinder stroke: 1000mm; 6. Displacement measurement range: within the full scale range 7. Force measurement method: Load sensor force measurement; 8. The machine has a broken protection function, automatically determine the tensile strength of the sample, the maximum breaking force and other indicators. 9. Microcomputer Control Electrohydraulic Servo Horizontal Tensile Tester Appearance Length Dimensions: Approx. 15m
