MOT500-M4 Online Four-in-One Gas Detector Introduction: The online four-in-one gas detector is suitable for detecting the concentration of composite gases in various environments. It utilizes imported gas sensors and microcontroller technology, featuring fast response, high measurement accuracy, and excellent stability and repeatability. The MOT500 gas detector, installed in a fixed manner, detects combustible and toxic gas leaks on the industrial site. It can simultaneously detect four gases online, with full software automatic calibration and sensor calibration up to 6 levels of target points, ensuring detection accuracy and linearity. Additionally, it has a data recovery function Features: 1. Multiple signal outputs, including 4-20mA, RS485, 0-5V, and 0-10V 2. Multiple transmission modes are available: 3-4 core cable, fiber optic, network cable, GPRS wireless transmission, and RTU wireless transmission 3. Multiple data receiving methods: user's computer, control alarm, PLC, DCS, mobile phone, tablet, etc 4. Adopting high-end, original imported sensors from multiple countries 5. Sensors with long lifespan and a wide variety 6. It encompasses technologies such as electrochemical, catalytic combustion, infrared, semiconductor, thermal conduction, and PID photoionization 7. Equipped with an infrared remote control, it allows for operation without opening the cover in hazardous situations. Technical Specifications Detected gases: any combination of four gases including combustible gas, carbon monoxide, oxygen, ammonia, sulfur dioxide, hydrogen sulfide, carbon dioxide, methane, nitrogen oxides, benzene, nitrogen, VOC, TVOC, and chlorine Response time: ≤20 seconds (T90) Detection accuracy: ≤±3% (depending on the specific sensor) Linear error: ≤±1% Zero drift: ≤±2% (F.S) Recovery time: ≤20 seconds Gas extension: Supports 4 sensors (optional) Repeatability: ≤±1% Explosion-proof certification: CLEx21.2087X Protection level: IP66 Temperature and Humidity: Optional accessories, temperature detection range: -40 to 120℃, humidity detection range: 0-100%RH Detection methods: diffusion, flow-through, and pump suction are optional Installation methods: wall-mounted, pipeline (thread size: M40X1.5mm), and flow-through Signal output: 1.4-20mA signal: Standard 16-bit precision 4-20mA output chip, with a transmission distance of 1Km 2. RS485 signal: Adopting the standard MODBUS RTU protocol, with a transmission distance of 2Km 3. Voltage signal: 0-5V, 0-10V output, adjustable 4. Switching signal: Standard configuration includes 2 sets of relays, with an optional third set. It features passive contacts with a capacity of 125VAC/0.3A and 30VDC/1A Transmission mode: 1. Cable transmission: 3-core and 4-core cable lines, long-distance transmission (1-2 kilometers) 2. TCP/IP transmission: Supports TCP/IP protocol, utilizes fiber optic cables and network cables, and enables real-time transmission over long distances through both internal and external networks (optional) 3. GPRS transmission: It can be equipped with a built-in GPRS module for real-time remote data transmission, without distance restrictions (optional) 4. Wireless transmission: Supports 433Mhz, wireless radio transmission mode, with a transmission distance ranging from 2 to 10 kilometers, depending on different power levels (optional) Receiving devices: user computers, control alarms, PLCs, DCSs, mobile phones, tablet computers, etc. (optional) Alarm modes: On-site audible and visual alarm, external alarm device, remote controller alarm, computer data acquisition software alarm, SMS alarm (optional) Alarm settings: 1. Standard configuration includes two-level alarm, with an optional third-level alarm 2. The gas sensor can be set with two alarm modes: conventional high and low alarms, and interval control, which can control the concentration range of the gas Shell material: die-cast aluminum + sandblasted oxidation/fluorocarbon paint, explosion-proof and corrosion-resistant Working environment: 1. Operating temperature: -20 to 50℃ 2. Operating humidity: ≤95%RH, no condensation Working pressure: 90 ~ 110Kpa Operating power supply: 24VDC (12~30VDC) Electrical interface: 3/4″NPT female thread, 1/2″NPT female thread, supporting 2 types of electrical connection methods simultaneously Size and weight: 196*170*80mm (L×W×H) 1.5Kg (net weight) Standard accessories: instruction manual, quality certificate
MOT500-M4 Online Four-in-One Gas Detector Introduction: The online four-in-one gas detector is suitable for detecting the concentration of composite gases in various environments. It utilizes imported gas sensors and microcontroller technology, featuring fast response, high measurement accuracy, and excellent stability and repeatability. The MOT500 gas detector, installed in a fixed manner, detects combustible and toxic gas leaks on the industrial site. It can simultaneously detect four gases online, with full software automatic calibration and sensor calibration up to 6 levels of target points, ensuring detection accuracy and linearity. Additionally, it has a data recovery function