Product principles: The MM12 automatic nucleic acid extraction system uses membrane adsorption and "three in one" technology to extract high-quality nucleic acid. Triple-in-one technology: a new technique for nucleic acid extraction by combining fitting tubes, centrifugal columns and liquid-transfer suction heads. In the process of nucleic acid extraction, the centrifuge column will move along with the liquid transfer suction head, and the lower surface of the membrane can also adsorb nucleic acid. The dissociated samples and reagents are shuttled through the centrifuge column by the conversion of the upper and lower pressure of the membrane to complete the nucleic acid extraction. Product features: 1. 1-12 samples can be treated at one time; 2. Using "three-in-one" technology, nucleic acid extraction can be done on the "iCartridge", where the space is very small and runs in a straight line. 3. Operation process from cracking, adsorption, elution, drying, to the dissolution of nucleic acid completely automated operation; 4. Nucleic acid was extracted by membrane adsorption. 5. Single channel design can avoid cross contamination; 6. The nucleic acid can be extracted 3-8 μ g DNA from 200 μ l whole blood samples. 7. The extracted nucleic acid can be directly used in downstream test. 8. The extracted waste liquid is discharged directly back into the "iCartridge" pipe without the need to install the waste liquid tank. 9. With its own operating system, the operation procedure is simple and fast. Product use: 1. It is suitable for extracting genomic DNA from whole blood, blood white membrane, body fluid, lymphocytes and cultured cells. 2. It is suitable for extracting genomic DNA from animal tissues, bacteria and yeast. 3. It is suitable for extracting genomic DNA from plant tissues, cells and fungi. 4. It is suitable for the extraction of total RNA from whole blood, blood white membrane, body fluid, lymphocytes and cultured cells. 5. It is suitable for the extraction of total RNA from animal tissues, bacteria and yeast. 6. It is suitable for the extraction of total RNA from plant tissues, cells and fungi. 7. It is suitable for extracting virus DNA from urine, secretions and other acellular body fluids. 8. It is suitable for extracting virus RNA from urine, secretions and other acellular body fluids. Technical parameters: 1. 1-12 samples can be treated at one time; 2. 3-8 μ g DNA could be extracted from 200 μ l blood samples. 3. Extraction time: 50-75 min; 4. Single sample capacity: 200-400 μ l; 5. Elution volume: 50100150200 μ l; 6. Operation interface: WVGA16: 9) LCD7; 7. Light source: White LED lamp; 8. Environmental temperature: 15-30 ℃; 9. Working voltage: 220 V / 50 Hz. 10. W × H × D: 440 × 720 × 640 mm; 11. Weight: 60 kg.
