Introduction: The high-energy jaw mill MG100 can be used to mix or grind samples of hard, soft, brittle or pasty properties, allowing dry, wet or freeze grinding of samples, MG100 for modern laboratory applications, not only It has extraordinary performance in terms of handling ability and in terms of operational comfort and safety. The sample to be treated is placed between the mortar and pestle through the feed port at the top and ground. The sample is pulverized by the pressing and rubbing between the crucible and the wall of the mortar. The rotating mortar drives the rotation of the crucible, and the sample is also rotated, and the grinding is repeated to achieve uniform mixing of the sample. Taking into account the final accuracy and pressure matching and the need to terminate the sample preparation at any time, the jaw mill MG series is equipped with a top pressure mechanism and a flexible scraper setting and the speed is adjustable from 50-130 rpm. Applications Sample properties: soft, hard, brittle and paste-like properties Typical samples: soil samples, chemicals, herbs, seasonings, yeast cells, cocoa, food, grains, oilseeds, salts, slag, silicates, glass, ceramics, cement slag Features: Easy to clean 2. Suitable for dry grinding, wet grinding and freeze grinding. Samples can be added with liquid nitrogen for grinding. 3. Optional pretreatment for rough samples 4. The amount of sample can be increased through the feed window during the grinding process, with an observation window 5. The position of the mortar and hoe can be adjusted without tools 6. Memory storage parameter function, can store 9 sets of grinding parameters 7. Suitable for samples with different heat sensitivity to optimize the grinding results accurately 8. The digital setting of time and speed makes the grinding result representative 9. The mortar and hoe materials have multiple choices 10. Scraper material has a wide range of options to meet all application tasks (polyurethane, PTFE, eucalyptus) Technical Parameters: Injection size: <10 mm, depending on the sample Sample size: <5 microns (depending on the nature of the sample) Speed: 50-130 rev / min, adjustable speed Sample throughput: 10-200 ml Grinding time setting: 00:01~99:59 (hour/min) Pressure setting: Yes, through the ruler Pitch adjustment: through the screw Scraper plate adjustment: through the screw Display: Digital tube display Locking device: external screw locking Rated power: 180 watts Rated voltage: 220 volts, 50 Hz Instrument size (horizontal * vertical * height): 400 * 456 * 502 mm Package size (horizontal * vertical * height) : 590 * 590 * 630 mm Instrument weight: 33 kg
Introduction: The high-energy jaw mill MG100 can be used to mix or grind samples of hard, soft, brittle or pasty properties, allowing dry, wet or freeze grinding of samples, MG100 for modern laboratory applications, not only It has extraordinary performance in terms of handling ability and in terms of operational comfort and safety. The sample to be treated is placed between the mortar and pestle through the feed port at the top and ground. The sample is pulverized by the pressing and rubbing between the crucible and the wall of the mortar. The rotating mortar drives the rotation of the crucible, and the sample is also rotated, and the grinding is repeated to achieve uniform mixing of the sample. Taking into account the final accuracy and pressure matching and the need to terminate the sample preparation at any time, the jaw mill MG series is equipped with a top pressure mechanism and a flexible scraper setting and the speed is adjustable from 50-130 rpm.
