LS233 paint film tester Introduction: LS233 used car paint film tester is specialized in detecting the thickness of car paint, equipped with high-definition LCD screen and OLED low temperature resistant screen, which can be used normally at - 40 ℃ ultra-low temperature. The dual-screen design can ensure that the user can read quickly when measuring the car at any angle. The instrument adopts the dual principles of Hall effect and eddy current, and is used for both iron and aluminum. It can automatically identify the iron and aluminum body and non-metallic base materials, and is convenient to operate, compact and portable. characteristic: 1. OLED low temperature resistant screen is adopted at the top, and HD LCD screen is adopted at the front, with dual screen display and convenient reading 2. In the automatic measurement mode, the instrument can intelligently identify the iron powder putty, and the measurement is accompanied by two beeps. 3. In the automatic measurement mode, the instrument can automatically identify the high-grade iron galvanized anti-corrosion body, quickly assist in judging whether the car has replaced the auxiliary parts. When the iron zinc body is detected, the screen will prompt "iron zinc". 4. The top is equipped with a low temperature resistant OLED screen, which is used in the environment of minus 40 degrees, and the screen is not stuck or white 5. 0.5 second measurement interval, sensitive response, fast and efficient. 6. The instrument can identify iron and aluminum body and non-metallic substrate, and automatically switch the measurement mode 7. The probe tip is made of high hardness ruby, which is wear-resistant and corrosion resistant, and has a longer service life Technical parameters: Probe tip: ruby Measuring principle: Fe: Hall effect/NFe: eddy current Probe type: built-in integrated type Measuring range: 0.0-2000 μ m Resolution: 0.1 μ m:0 μ m - 99.9 μ m one μ m:100 μ m - 999 μ m 0.01mm:1.00mm - 2.00mm Measurement accuracy: ≤± (3% H+2 μ m) H is the standard value Company: μ m / mil Measurement interval: 0.5s Minimum measuring area: Ø=25mm Minimum radius of curvature: convex: 5mm/concave: 25mm Minimum substrate thickness: Fe: 0.2mm/NFe: 0.05mm Display: Front: 128 × 48 dot matrix LCD, top: 128 × 64 dot matrix OLED Power supply mode: 2 1.5V AAA alkaline batteries Operating temperature range: - 40 ℃ - 50 ℃ (OLED screen), - 20 ℃ - 50 ℃ (LCD screen) Storage temperature range: - 50 ℃ - 60 ℃ Host size: 100 * 60 * 24mm Weight (including battery): 80g
Introduction: LS233 used car paint film tester is specialized in detecting the thickness of car paint, equipped with high-definition LCD screen and OLED low temperature resistant screen, which can be used normally at - 40 ℃ ultra-low temperature. The dual-screen design can ensure that the user can read quickly when measuring the car at any angle. The instrument adopts the dual principles of Hall effect and eddy current, and is used for both iron and aluminum. It can automatically identify the iron and aluminum body and non-metallic base materials, and is convenient to operate, compact and portable.
