LS163 solar film tester Introduction: LS163 is both a solar film tester and a portable transmittance tester. The instrument can test three parameters of visible light, infrared ray and ultraviolet ray, and has three different display modes, namely, transmittance display, barrier display and transmittance display. The LS163 solar film detector is widely used in the solar film, glass industry, automobile 4S stores, beauty shops, etc. It is applicable to the optical performance display, exhibition, production, quality inspection, inspection and other occasions of solar film, film glass, PC materials, window glass and other materials. characteristic: 1. The operation is simple and the measurement is fast. As long as the test material is put into the test tank, the three test results will be displayed immediately at the same time 2. The LS163 solar film tester is designed with parallel optical path, and the test notch is up to 6mm, which can test solar film, film glass, automobile side shield glass and large thickness materials, etc 3. The display interface can rotate 360 ° adaptively, which is convenient for reading data when testing from different angles 4. LS163 solar film detector has real-time dynamic self-calibration function. After starting, the transmittance is automatically calibrated to 100%, and the barrier rate is automatically calibrated to 0% 5. The display data of ultraviolet ray and infrared ray can be set as barrier rate or transmittance, or only the transmittance of visible light can be displayed 6. The instrument has the data locking function. After the test, press the HOLD key on the instrument to lock the test data. Take away the test sample data and still keep it on the display interface 7. The LS163 portable solar film tester is small in size and anti-skid design, which is convenient for grasping and carrying Technical parameters: UV: peak wavelength 365nm Infrared: peak wavelength 940nm Visible light: 380nm-760nm full band, in line with CIE standard for bright vision function Measurement accuracy: ± 2% (colorless and uniform transparent material), and the ex-factory standard sample is better than ± 1% Resolution: 0.1% Test slot size: 6mm wide × 58mm deep Display: 128 * 128 dot matrix LCD Overall dimension: 146mm long × Width 73mm × Height 24mm Instrument weight: about 187g (including battery) Power supply: 4 AAA alkaline dry batteries
Introduction: LS163 is both a solar film tester and a portable transmittance tester. The instrument can test three parameters of visible light, infrared ray and ultraviolet ray, and has three different display modes, namely, transmittance display, barrier display and transmittance display. The LS163 solar film detector is widely used in the solar film, glass industry, automobile 4S stores, beauty shops, etc. It is applicable to the optical performance display, exhibition, production, quality inspection, inspection and other occasions of solar film, film glass, PC materials, window glass and other materials.
