Brief introduction: Friction and wear tester, reciprocating - in situ synchronous is the study of material or coating surface friction behavior special instruments. Can be in uniform linear reciprocating motion mode, dynamic, in situ synchronization measure the material of the friction coefficient and wear resistance, surface configuration, grinding crack depth, etc., and through the computer real-time map out several measurements of change curve and corresponding relation of 3 d graphics. Technical indicators: Reciprocating friction way: reciprocating single, double Reciprocating number: 1 ~ 10000 times Sample frictional sliding length: 10 ~ 20 mm is adjustable Sliding speed: 10 ~ 200 mm/min continuously adjustable Load range: single reciprocating 10 ~ 500 g 0.1 g precision Double reciprocating 10 ~ 1000 g 0.1 g precision On sample size: 3 ~ 5 mm ball Ф Ф or Ф 3 mm bolt, bolt length: 3 mm The sample size: Φ 10 ~ 30 mm, thickness: Φ 8 to 30 mm Friction test accuracy: 0.5% FS Surface contour displacement measuring range: precision of + / - 0.5 mm (including 0.5 m (according to user requirements change measuring range), Instrument host size (mm) : 350 * 250 * 400 Instrument host weight (Kg) : 30
Brief introduction: Friction and wear tester, reciprocating - in situ synchronous is the study of material or coating surface friction behavior special instruments. Can be in uniform linear reciprocating motion mode, dynamic, in situ synchronization measure the material of the friction coefficient and wear resistance, surface configuration, grinding crack depth, etc., and through the computer real-time map out several measurements of change curve and corresponding relation of 3 d graphics.
