LDG-MIK-ZA electromagnetic flowmeter Introduction: LDG-MIK-ZA is an electromagnetic flowmeter that combines high precision, reliability, stability, and ultra long service life. It is widely used in industries such as water supply and drainage, sewage treatment, metallurgy, chemical and constraint industries, food and beverage industries, petroleum, petrochemical pulp, pulp and electricity, etc. LDG-MIK-ZA has strict indicators and records in every stage of product structure design, material selection, manufacturing process, production assembly, and factory testing, ensuring the quality controllability of the entire process from raw materials to factory. Technical parameters: Executive standard: JB/T92482015 Measurement principle: Faraday's electromagnetic induction theorem Integrated type: protection level IP67 Splitting type: Meter head protection level P65 (body protection level IP68) Caliber: DN10~DN1600 Flange: in accordance with GB/T91122000 Lining materials: chloroprene rubber (CR), polyurethane rubber (UR), polytetrafluoroethylene PTFE (F4), polytetrafluoroethylene, ethylene propylene FEP (F46), PTFE (PFA) Electrodes: stainless steel 316, Hastelloy (HB and HC), titanium, tantalum, platinum iridium alloy Medium temperature: Neoprene rubber: (-10~70) ℃ Neoprene rubber: (10~70) ℃ Polyurethane rubber: (10-60) ℃ Polyurethane rubber: (10-60) ℃ PTFE/FEP: (10-120) ℃ CPTFE/FEP: (10-120) ℃ PFA: (10-120) ℃ CPFA: (10-180) ℃ Buriability: less than 2m (only for P68 protected split type sensors) Immersion depth: less than 2m (only for IP68 protected split type sensors) Serial communication: RS485 (optional RS232) MODBUS interface: RTU format, physical interface RS485, electrical isolation 1000V Function: Air traffic control identification Graphics display: High definition backlit LCD display Environmental temperature: Integrated flow meter -10 ℃~55 ℃, sensor part of split flow meter -10 ℃~60 ℃ Converter part of split type flow meter -10 ℃~55 ℃ Storage temperature: 40 ℃~65 ℃ Sensor housing: carbon steel Converter: Standard die cast aluminum Power supply voltage: (85-265) VAC, (45-63) Hz, (16-30) VDC Power: less than 15W Current output: DC current output signal: fully isolated (0-10) mA or (4-20) mA (active or passive) Load resistance: (0-10) mA, (0-1.5) k Ω, (4-20) mA, (0-750) Ω Frequency output: The upper limit of the output frequency can be set within 1-500Hz with a transistor collector with photoelectric isolation Open circuit bidirectional output. The external power supply shall not exceed 35V, and the maximum current of the collector during conduction shall be 250mA
Introduction: LDG-MIK-ZA is an electromagnetic flowmeter that combines high precision, reliability, stability, and ultra long service life. It is widely used in industries such as water supply and drainage, sewage treatment, metallurgy, chemical and constraint industries, food and beverage industries, petroleum, petrochemical pulp, pulp and electricity, etc. LDG-MIK-ZA has strict indicators and records in every stage of product structure design, material selection, manufacturing process, production assembly, and factory testing, ensuring the quality controllability of the entire process from raw materials to factory.
