KuboX1000 specific surface area analyzer Introduction: The Kubo-X1000 is a multi-analysis station fully automatic physical adsorption analyzer suitable for micropore applications. It boasts advanced technology, excellent quality, and a more comprehensive theoretical model, offering superior testing accuracy for micropores (0.7-2nm), ultramicropores (0.35-0.7nm), and ultra-small specific surface areas (<1m2/g). It meets various application needs in scientific research and academic discussions Features: 1. Ultra-fast micropore analysis efficiency: The Kubo-X1000 features three parallel analysis stations The Kubo-X1000 features three fully independent and parallel analysis stations, each capable of testing ultra-microporous, microporous, mesoporous, macroporous, and low specific surface area samples. These three analysis positions can operate simultaneously, with each position operating independently and featuring its own gas path control system and pressure detection system. There is no need to wait for the completion of the current process on other analysis positions before starting the next process 2. Excellent micropore analysis performance: Accurate results can be obtained within the relative pressure range of P/P0 from 10-6 to 10-8 For the testing requirements of specific surface area and pore size of microporous and ultramicroporous samples, the equipment should possess higher vacuum degree and pressure detection capability. The Kubo-X1000, equipped with superior hardware in the field, integrates multiple core technologies: an ultra-high vacuum bistable valve body, achieving "0" heating; B-ST technology for pressure testing, providing real-time feedback on the adsorption state after each gas injection; dynamic calibration technology for dead volume, enabling dynamic calibration of testing time and dead volume quantification; and a PFC high-precision pressure electronic control system, significantly reducing vacuum time and increasing testing speed by 50% 3. Excellent low specific surface area analysis performance. Multiple AI intelligent judgment modes and processing schemes are available Most instruments on the market employ degassing methods on the main unit and set fixed degassing times, which are not only inefficient but also fail to meet the needs of most samples. The Kubo-X1000 is equipped with a fully independent sample preprocessor and a separate sample processor. This ensures that while analyzing samples, the preprocessing of the next batch of samples can be carried out simultaneously, thereby improving the work efficiency of both the instrument and personnel. The instrument utilizes AI intelligent judgment modes and multiple sample processing schemes, including vacuum extraction, temperature rise for dehydration, and gas injection protection, to ensure that the samples meet the preparation requirements. Technical parameters: Test functions: adsorption and desorption isotherms, BET/Langmuir specific surface area, BJH pore volume/pore area/total pore volume/total pore area analysis, t-plot/MP/HK/SF/DR and other micropore analyses/analysis of special micropore samples using argon or carbon dioxide Test scope: specific surface area > 0.0005 m2/g; pore size analysis ranging from 0.35 nm to 500 nm Test accuracy: ≤1% (≤1m2/g sample: ±1.5%) Analysis station: 3 sample analysis ports, 1 P0 real-time testing position Dewar flask capacity: 4L Degassing station: An independent, intelligent sample preparation station, equipped with a heating furnace capable of reaching a temperature of up to 400℃, an independent mechanical pump, a pressure sensor, and an AI touch system. This system can intelligently determine the completion degree of sample processing Pressure detection system: Each analysis port is equipped with an imported multi-range pressure sensor, and the software allows real-time viewing of pressure values at various locations (sensor ranges: 0-0.1 torr, 0-10 torr, 0-1000 torr). The saturated vapor pressure test position is equipped with an independent pressure sensor for real-time collection of saturated vapor pressure
KuboX1000 specific surface area analyzer Introduction: The Kubo-X1000 is a multi-analysis station fully automatic physical adsorption analyzer suitable for micropore applications. It boasts advanced technology, excellent quality, and a more comprehensive theoretical model, offering superior testing accuracy for micropores (0.7-2nm), ultramicropores (0.35-0.7nm), and ultra-small specific surface areas (<1m2/g). It meets various application needs in scientific research and academic discussions
