Brief introduction: Architectural coatings resistance wash apparatus is used to determine coating coating (surface) of scrubbing resistance instrument. Sometimes also used to evaluate any film composite processed surface such as: paint, electroplating, floor, skin coat, wood density and form on the surface of the performance. The device to besmear to brush in the paint marching on the standard test plate cleaning. Instrument adopts programmable control, LCD display, operation is simple, has the information power-off protection function. JTX II architectural coatings resistance wash machine has reliable performance and convenient use. The instrument to the national standard GB/T9266, paint manufacturers and coating is indispensable verification instrument research department. Technical parameters: Brush size: 38 x90mm floor uniform 60 Ф 19 mm 3 holes in pig hair) hair long Brush (including scrubbers) weight: 450 + 2 g Drip speed: drops of about 0.04 g per second Brush stroke: 300 mm Brush operating frequency: 37 + 1 times/min Counting control display digits: five Count range: 99999 times Test plate size: 430 x150x3mm The motor power: 25 w Power supply: 220 v, 50 hz Installation dimensions: 570 x420x300mm The weight: 32 kg
Brief introduction: Architectural coatings resistance wash apparatus is used to determine coating coating (surface) of scrubbing resistance instrument. Sometimes also used to evaluate any film composite processed surface such as: paint, electroplating, floor, skin coat, wood density and form on the surface of the performance. The device to besmear to brush in the paint marching on the standard test plate cleaning.
